Curriculum
Course: Edexcel IAL Physics (IAS & A2)
Login

Curriculum

Edexcel IAL Physics (IAS & A2)

1. Mechanics and Materials

0/71 Dr Dabour Hub Science Diagram and Course Material

2. Waves and Electricity

0/108 Dr Dabour Hub Science Diagram and Course Material

3. Practical Skills in Physics I

0/52 Dr Dabour Hub Science Diagram and Course Material

4. Further Mechanics, Fields and Particles

0/90 Dr Dabour Hub Science Diagram and Course Material

5. Thermodynamics, Radiation, Oscillations and Cosmology

0/96 Dr Dabour Hub Science Diagram and Course Material
Text lesson

3.1.9 Uncertainty and Systematic Errors

3.1.9 Uncertainty and Systematic Errors — EDEXCEL IAL PHYSICS (IAS & A2) notes: Distinguish uncertainty from error, systematic from random errors, and combine uncertainties.

1Uncertainty · Never zero · Error2Difference · Example
Uncertainty · Never zero · Error
Uncertainty
an estimate of the range around a measurement within which the true value is expected to lie.
Never zero
the true value cannot be obtained exactly

so every measurement has some uncertainty.
Error
the difference between the measurement and the true value

it is not a mistake.
1 / 2Next ▶
Difference · Example
Difference
an error of unknown size is a source of uncertainty.
Example
a balance reading 952 g for a true 950 g mass has an uncertainty of ±2 g.
◀ Previous2 / 2
1Quoting · Fractional · Percentage2Set by
Quoting · Fractional · Percentage
Quoting
x ± Δx

where Δx is the absolute uncertainty in the same unit as x.
Fractional
Δx/x.
Percentage
Δx/x × 100%.
1 / 2Next ▶
Set by
Set by
the larger of the instrument resolution and the spread of the repeats.
◀ Previous2 / 2
1Cause · Effect · Reduce2Other ways
Cause · Effect · Reduce
Cause
unpredictable variations such as reaction time and reading a scale.
Effect
readings scatter above and below the true value.
Reduce
take repeat readings (about 3 to 5) and average.
1 / 2Next ▶
Other ways
Other ways
measure a wire’s diameter at different places and use the appropriate instrument.
◀ Previous2 / 2
1Systematic errors2Systematic errors
Systematic errors
Cause
faulty instruments or flaws in the method, such as a zero error.
Effect
the same error is repeated every time, affecting the accuracy of all readings.
On graphs
the line of best fit misses the origin when it should pass through it

the offset shows the size of the error.
Reduce
recalibrate instruments or use different ones, and adjust the technique.
1 / 2Next ▶
Four target diagrams showing accurate and precise results, systematic error only, random error only, and systematic plus random error.
Systematic errors
◀ Previous2 / 2
Measuring small quantities
Many fringes
measure across several fringe spacings and divide by the number of spacings to reduce the uncertainty.
Many oscillations
time 10 oscillations and divide by 10.
Largest uncertainties
extremely small or large measurements, and the most subjective ones, such as a blurry diffraction pattern.
1Adding or subtracting · Multiplying or dividing · Powers2Constants · Quote
Adding or subtracting · Multiplying or dividing · Powers
Adding or subtracting
add the absolute uncertainties.
Multiplying or dividing
add the percentage uncertainties.
Powers
for a power n, multiply the percentage uncertainty by n

so in A = πd2/4 the uncertainty in A is twice that in d.
1 / 2Next ▶
Constants · Quote
Constants
π and numerical factors carry no uncertainty.
Quote
give the uncertainty to one significant figure and match the value to the same decimal place.
◀ Previous2 / 2
1Uncertainty on graphs2Uncertainty on graphs
Uncertainty on graphs
1

Error bars show the uncertainty in each plotted point.
2

Gradient draw the best-fit line and a worst-acceptable line

the percentage uncertainty is |mbest − mworst|/mbest × 100%.
3

Comparing with an accepted value the values agree if the accepted value lies within the result ± its uncertainty.
4

A digital reading is uncertain by half of its resolution, just as an analogue reading is.
5

Calibration matters most at higher readings

because it compares the instrument with a known measurement to check its accuracy.
6

Measuring devices lose accuracy over time through normal wear, and calibration improves it.
1 / 2Next ▶
Uncertainty on graphs
Uncertainty on graphs
A systematic error can change in size with the reading

so the gap from the true value is not always the same.
In circuits, temperature is a common control variable, since current gradually warms wires and components.
Components are often disconnected between readings so they can cool and keep the temperature constant.
An instrument with a coarse resolution cannot register the small changes an experiment needs to detect.
◀ Previous2 / 2
More from the specification
Precision of Measuring Apparatus
  • Selecting suitable laboratory equipment ensures high precision and low uncertainty.
    • (e.g., micrometer screw gauge for wire diameter, digital thermometer for temperature)
Control Variables in Experiments
  • Keeping environmental variables constant ensures that variations in measured length or resistance are caused solely by the independent variable.
    • (such as room temperature)
Mitigating Systematic Experimental Errors
  • Calibrating measuring equipment eliminates systematic offsets before conducting scientific investigations.
    • (such as checking zero alignment on calipers)
Absolute and Percentage Uncertainty
  • The uncertainty of a single reading with an analogue instrument is half the smallest division,
    • (e.g., rule or thermometer)
  • while repeated trials use half the range.
Precision of Measuring Apparatus
  • Selecting suitable laboratory equipment ensures high precision and low uncertainty.
    • (e.g., micrometer screw gauge for wire diameter, digital thermometer for temperature)
Control Variables in Experiments
  • Keeping environmental variables constant ensures that variations in measured length or resistance are caused solely by the independent variable.
    • (such as room temperature)
Mitigating Systematic Experimental Errors
  • Calibrating measuring equipment eliminates systematic offsets before conducting scientific investigations.
    • (such as checking zero alignment on calipers)
Absolute and Percentage Uncertainty
  • The uncertainty of a single reading with an analogue instrument is half the smallest division,
    • (e.g., rule or thermometer)
  • while repeated trials use half the range.
Control variable
  • A quantity kept the same to make the test fair
Young modulus
  • Ratio of stress to strain for a material, E = σ/ε.
Independent variable
  • The variable deliberately changed, here time
Dependent variable
  • The variable measured, here temperature
Calibration curve
  • A graph converting an instrument’s reading to the true value.
Potential difference
  • Work done by a unit charge passing through a component.
Apparatus
  • The equipment needed to carry out an experiment.
Variable
  • A factor that can change in an investigation.
Length
  • Resistance is directly proportional to the length of a wire.
Temperature
  • Measure of the average kinetic energy of the particles.
Thermometer
  • A device that reaches equilibrium with an object to measure its temperature
Micrometer
  • An instrument measuring very small lengths to 0.01 mm.
Voltmeter
  • Instrument that measures p.d., connected in parallel.
  • Safety
    • Keep electrical equipment away from water; wipe up spills; do not look directly at a bright strobe or lamp
Key terms
Term Meaning
Uncertainty The range around a measurement within which the true value is expected to lie.
Error The difference between a measurement and the true value.
Random error An error that varies unpredictably from reading to reading.
Systematic error An error that shifts all readings consistently.
Percentage uncertainty The absolute uncertainty as a percentage of the measured value.
Error bar A line on a plotted point showing its uncertainty.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Adding percentage uncertainties when subtracting quantitiesuse absolute uncertainties for sums and differences.
2Avoid this
Forgetting to double the percentage uncertainty for a squared quantity.Avoid this
3Avoid this
Quoting an uncertainty to many significant figures.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Thinking repeating a measurement reduces a zero errorit does not.
◀ Previous2 / 2
Accepted payment methods