Curriculum
Course: Edexcel IAL Physics (IAS & A2)
Login

Curriculum

Edexcel IAL Physics (IAS & A2)

1. Mechanics and Materials

0/71 Dr Dabour Hub Science Diagram and Course Material

2. Waves and Electricity

0/108 Dr Dabour Hub Science Diagram and Course Material

3. Practical Skills in Physics I

0/52 Dr Dabour Hub Science Diagram and Course Material

4. Further Mechanics, Fields and Particles

0/90 Dr Dabour Hub Science Diagram and Course Material

5. Thermodynamics, Radiation, Oscillations and Cosmology

0/96 Dr Dabour Hub Science Diagram and Course Material
Text lesson

3.3.2 Plotting Graphs

3.3.2 Plotting Graphs — IAL Physics Notes — EDEXCEL IAL PHYSICS (IAS & A2) notes: Plot a graph from a table of results with correct axes, scales, points and line of best fit, and find a gradient and intercept.

Trend · Constants · Straight lines
Trend
a graph shows a trend across many readings and lets anomalous points be spotted.
Constants
a quantity such as a constant can be found from the gradient or intercept.
Straight lines
variables are chosen so that the equation becomes y = mx + c

because a straight line is easiest to judge by eye.
1Axes · Scale size · Scale values2Direction · Origin
Axes · Scale size · Scale values
Axes
the independent variable (changed) goes on the x-axis and the dependent variable (measured) goes on the y-axis.
Each axis is labelled quantity / unit, for example F / N or T2 / s2.
Scale size
the points should fill more than half of the grid in both x and y directions, using as much of the paper as possible.
Scale values
use 1, 2, 5 or 10 units per large square and avoid multiples of 3 or 7.
1 / 2Next ▶
Direction · Origin
Direction
scales increase outwards and upwards from the origin and are numbered at regular intervals.
Origin
it need not be shown unless an intercept at zero must be read or the line is predicted to pass through it.
◀ Previous2 / 2
Marking · Number of points · Error bars
Marking
use a small neat cross or a dot in a circle, accurate to within half a small square.
Use a sharp pencil so that points are thin, clear and not obscured by the line.
Number of points
plot at least six points and identify any major outliers.
Error bars
draw them with a ruler.
The half-length equals the absolute uncertainty in that variable.
Drawing · Curves · Anomalous points
Drawing
use a clear plastic ruler to draw a single thin continuous line with equal numbers of points above and below it.
It should not be forced through the origin unless the data support it.
Curves
if the points suggest a curve, draw a smooth curve, not dot-to-dot joined lines like a frequency polygon.
Anomalous points
an obviously incorrect point is circled and ignored

because it has a large effect on the gradient.
Gradient · y-intercept
Gradient
gradient = Δy ÷ Δx = (y2 − y1) ÷ (x2 − x1).
Use two points on the line, not data points, at least half the line length apart, and show the triangle on the graph.
The unit of the gradient is the unit of y divided by the unit of x.
y-intercept
the y value where the line crosses the y-axis at x = 0.
Read it accurately, interpreting the y-axis scale correctly.
If the x-axis does not start from zero, substitute a point into y = mx + c instead.
1Axes and scale · Model · Least-squares fit2Display
Axes and scale · Model · Least-squares fit
Axes and scale
software does not choose sensible axes

so check labels, units and whether the scale starts at zero for an intercept.
Model
a straight trend line can be drawn through curved data

so check that a straight line is the right model.
Least-squares fit
all points are treated equally

so an anomalous point pulls the line and must be investigated first.
1 / 2Next ▶
Display
1

round the displayed gradient to match the data and add its unit yourself.
2

A sketch is a freehand drawing with labelled axes and key features, and its axes are not scaled.
3

A horizontal straight line shows that the dependent variable stays constant as the independent variable changes.
4

Some quantities, such as refractive index, have no unit

so their axis label carries only the quantity name.
◀ Previous2 / 2
More from the specification
Error bar plotting to highlight errors
  • Error bar plotting to highlight errors displaying horizontal and vertical uncertainty bounds on coordinate points illustrates experimental uncertainties and random errors.
Absolute and Percentage Uncertainties in Measurements
  • Absolute uncertainty represents the experimental precision limit of a reading; percentage uncertainty expresses this uncertainty relative to the measurement: Percentage Uncertainty = × 100%.
    • (Absolute Uncertainty / Measured Value)
Directly Proportional Relationships on Graphs
  • Two physical variables are directly proportional when their plotted graph forms a straight line passing through the origin (y = k·x),
  • which means doubling the independent variable doubles the dependent variable over the entire measurement range.
Inversely Proportional Relationships and Error Analysis
  • When two variables are inversely proportional (y ∝ 1/x), their graph forms a rectangular hyperbola; plotting y against 1/x yields a straight line whose slope gives the proportionality constant,
  • while error bars indicate measurement reliability.
Percentage uncertainty
  • The absolute uncertainty divided by the value, times 100%.
Inversely proportional
  • One quantity falls as the other rises in the same ratio.
Significant figures
  • Digits carrying meaningful information in a number.
Fiducial marker
  • A fixed reference mark used to judge when an oscillating object passes its centre position.
Repeat readings
  • Taking measurements again to reduce random error.
Parallax error
  • Error from reading a scale from the wrong angle.
Derived unit
  • A unit formed by multiplying or dividing SI base units.
Proportional
  • Changing by the same factor as another quantity.
Temperature
  • Measure of the average kinetic energy of the particles.
Key terms
Term Meaning
Independent variable The quantity deliberately changed in an experiment.
Dependent variable The quantity measured as a result of the change.
Line of best fit A smooth line passing close to all points with a balance above and below.
Gradient Change in y divided by change in x along the line.
y-intercept The value of y where the line crosses the y-axis.
Anomalous point A point that lies clearly away from the general trend.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Using data points instead of two points on the line for the gradientread the triangle from the line.
2Avoid this
Choosing scales such as 3 units per squareuse 1, 2, 5 or 10 to avoid plotting errors.
3Avoid this
Drawing a thick, sketchy or dot-to-dot linedraw one thin smooth line with a ruler.
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Putting the dependent variable on the x-axis without reasonthe independent variable goes on x.
5Avoid this
Forcing the line through the originfollow the data if there is a non-zero intercept.
◀ Previous2 / 2
Accepted payment methods