Curriculum
Course: Edexcel IAL Physics (IAS & A2)
Login

Curriculum

Edexcel IAL Physics (IAS & A2)

1. Mechanics and Materials

0/71 Dr Dabour Hub Science Diagram and Course Material

2. Waves and Electricity

0/108 Dr Dabour Hub Science Diagram and Course Material

3. Practical Skills in Physics I

0/52 Dr Dabour Hub Science Diagram and Course Material

4. Further Mechanics, Fields and Particles

0/90 Dr Dabour Hub Science Diagram and Course Material

5. Thermodynamics, Radiation, Oscillations and Cosmology

0/96 Dr Dabour Hub Science Diagram and Course Material
Text lesson

2.7.1 Electrical Resistivity

2.7.1 Electrical Resistivity — EDEXCEL IAL PHYSICS (IAS & A2) notes: Define resistivity and use R = ρL/A to compare wires and calculate resistance, length or area.

1Resistance · Collisions · Heating2Dependence
Resistance · Collisions · Heating
Resistance
all materials resist the flow of charge to some extent.
Collisions
free electrons in a metal collide with the ions in their way.
Heating
in the collisions they transfer some or all of their kinetic energy

which causes electrical heating.
1 / 2Next ▶
Dependence
Dependence
resistance depends on the length of the wire, its cross-sectional area and the resistivity of the material.
◀ Previous2 / 2
1Equation2Rearranged · Longer wire3Thicker wire
Equation
Equation
R = ρL/A for a uniform conductor at constant temperature.
R is the resistance (Ω).
ρ is the resistivity (Ω m).
L is the length (m).
A is the cross-sectional area (m2).
1 / 3Next ▶
Rearranged · Longer wire
Rearranged
ρ = RA/L, the resistance of a sample of unit length and unit cross-sectional area.
Longer wire
the longer the wire, the greater its resistance.
◀ Previous2 / 3Next ▶
Side view of a cylindrical wire with current I, length L and diameter d, plus an end-on circular cross-section labelled r and A = πr2.
Thicker wire
Side view of a cylindrical wire with current I, length L and diameter d, plus an end-on circular cross-section labelled r and A = πr²." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Thicker wire
the thicker the wire, the smaller its resistance.
◀ Previous3 / 3
1Definition · Property of the material · Unit2Higher resistivity · Conductivity
Definition · Property of the material · Unit
Definition
resistivity describes how much a material opposes the flow of current through it.
Property of the material
it does not depend on the size or shape of the sample

but it depends on temperature.
Unit
the ohm metre (Ω m)

which is different from the ohm.
1 / 2Next ▶
Higher resistivity · Conductivity
Higher resistivity
the higher the resistivity of a material, the higher its resistance.
Conductivity
the reciprocal of resistivity, 1/ρ.
◀ Previous2 / 2
1Typical values2Copper · Insulators · Data
Typical values
Material Approximate resistivity at room temperature (Ω m)
Copper 1.7 × 10-8
Aluminium 2.6 × 10-8
Constantan (alloy) 4.9 × 10-7
Silicon (pure) about 103
Glass about 1010 to 1014
1 / 2Next ▶
Copper · Insulators · Data
Copper
has a low resistivity

so current flows through it easily and it is used for wires.
Insulators
have such a high resistivity that virtually no current flows.
Data
resistivity values are given in the question and need not be memorised.
◀ Previous2 / 2
1Charge carriers · Pure metals · Alloys2Heating a metal3Semiconductors4Semiconductors
Charge carriers · Pure metals · Alloys
Charge carriers
resistivity depends on the number density n of free charge carriers and how often they collide with the lattice.
Pure metals
have many free electrons

so the resistivity is low.
Alloys
a different kind of atom disturbs the lattice,
so electrons scatter more and ρ rises

constantan and nichrome suit resistance wire and heating elements.
1 / 4Next ▶
Heating a metal
Heating a metal
increases lattice vibrations and therefore ρ.
◀ Previous2 / 4Next ▶
Semiconductors
1

heating releases more carriers

so the resistivity falls.
2

Metals conduct well because their outer-shell electrons become free to move through the lattice.
3

An ideal insulator has no charge carriers

so no current flows however large the voltage is.
4

Resistivity can be found from a graph of resistance against length, by multiplying its gradient by the cross-sectional area.
5

Keep the current small and switch it off between readings so the wire does not heat up and change its resistivity.
6

The end of the wire joined to the circuit must sit at zero on the ruler to avoid a zero error in length.
◀ Previous3 / 4Next ▶
Two graphs of resistivity against temperature: a metal whose resistivity rises linearly, and a semiconductor whose resistivity falls steeply.
Semiconductors
Two graphs of resistivity against temperature: a metal whose resistivity rises linearly, and a semiconductor whose resistivity falls steeply." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Semiconductors
Averaging several diameter readings taken along the wire reduces random errors in the measured diameter.
◀ Previous4 / 4
1Using the equation on wires2Using the equation on wires3Using the equation on wires
Using the equation on wires
1

1
2

Write the equation in the form needed: R = ρL/A, ρ = RA/L or L = RA/ρ.
3

2
4

Convert every quantity to SI units, with mm
5

to m
6

by multiplying by 10
1 / 3Next ▶
Using the equation on wires
Using the equation on wires
-6
.
3
Find the area of a circular wire from A = πd
/4 = πr
before substituting.
◀ Previous2 / 3Next ▶
Graph of resistance R against length L for a test wire, a straight line through the origin with measured points and a gradient triangle.
Using the equation on wires
Graph of resistance R against length L for a test wire, a straight line through the origin with measured points and a gradient triangle." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Using the equation on wires
4
Check the order of magnitude of the answer.
Proportional reasoning

Doubling the length doubles R.Doubling the diameter makes A four times larger, so R falls to one quarter.Stretching a wire to twice its length at constant volume halves A, so R becomes four times larger.
◀ Previous3 / 3
More from the specification
Electrical Resistivity and Potential Difference
  • The resistance of a uniform wire is R = ρL/A;
  • when connected across a potential difference, the voltage drop across segments of the wire increases linearly with length, functioning as a continuous potential divider.
Microscopic Drift Velocity
  • Electric current is related to charge carrier movement by the transport equation I = nAvq,
  • where v is the average drift velocity of free electrons, n is charge carrier density,
  • and q is electron charge.
Negative Temperature Coefficient Thermistors
  • In an NTC thermistor,
  • increasing temperature releases more conduction electrons, dramatically lowering its electrical resistance unlike metallic conductors where lattice vibrations increase resistance.
Potential Divider Circuits
  • In a series circuit containing a fixed resistor and a variable resistor or thermistor, the output voltage across one component varies with resistance according to Vout = Vin * (R₁ / (R₁ + R₂)).
Electrical Resistivity and Potential Difference
  • The resistance of a uniform wire is R = ρL/A;
  • when connected across a potential difference, the voltage drop across segments of the wire increases linearly with length, functioning as a continuous potential divider.
Microscopic Drift Velocity
  • Electric current is related to charge carrier movement by the transport equation I = nAvq,
  • where v is the average drift velocity of free electrons, n is charge carrier density,
  • and q is electron charge.
Negative Temperature Coefficient Thermistors
  • In an NTC thermistor,
  • increasing temperature releases more conduction electrons, dramatically lowering its electrical resistance unlike metallic conductors where lattice vibrations increase resistance.
Potential Divider Circuits
  • In a series circuit containing a fixed resistor and a variable resistor or thermistor, the output voltage across one component varies with resistance according to Vout = Vin * (R₁ / (R₁ + R₂)).
Gradient
  • Slope of a graph line.
Potential difference
  • Work done by a unit charge passing through a component.
Potential divider
  • Series resistors that share the supply p.d.
Drift velocity
  • Average velocity of charge carriers along a conductor.
Output voltage
  • P.d. measured across one of the resistors.
Light intensity
  • How bright the light falling on a surface is.
Input voltage
  • P.d. applied across the series resistors.
Thermistor
  • Resistor whose resistance falls as temperature rises.
Velocity
  • Rate of change of displacement.
Variable
  • A factor that can change in an investigation.
Series
  • Components in one loop, sharing the e.m.f. between them.
Voltmeter
  • Instrument that measures p.d., connected in parallel.
Component
  • Part of a vector along one axis.
Key terms
Term Meaning
Resistivity The property of a material equal to RA/L, in Ω m.
Resistance The potential difference across a component divided by the current through it (Ω).
Cross-sectional area The area of a cut through the conductor perpendicular to the current.
Conductivity The reciprocal of resistivity, 1/ρ.
Uniform wire A wire with the same material and cross-section along its length.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes
Avoid these mistakes
1Avoid this
Quoting resistivity in ohmsits unit is the ohm metre.
2Avoid this
Using the diameter instead of the area in R = ρL/Afind A = πd
/4 first.Avoid this
3Avoid this
1 / 3Next ▶
Avoid these mistakes
Forgetting to convert mm or mmAvoid this
to metres1 mm
is 10Avoid this
-6Avoid this
mAvoid this
.Avoid this
◀ Previous2 / 3Next ▶
Avoid these mistakes
4Avoid this
Saying doubling the diameter halves the resistanceit quarters it.
5Avoid this
Believing resistivity depends on the length or thickness of the sampleit is a property of the material.
◀ Previous3 / 3
Accepted payment methods