Curriculum
Course: Edexcel IAL Physics (IAS & A2)
Login

Curriculum

Edexcel IAL Physics (IAS & A2)

1. Mechanics and Materials

0/71 Dr Dabour Hub Science Diagram and Course Material

2. Waves and Electricity

0/108 Dr Dabour Hub Science Diagram and Course Material

3. Practical Skills in Physics I

0/52 Dr Dabour Hub Science Diagram and Course Material

4. Further Mechanics, Fields and Particles

0/90 Dr Dabour Hub Science Diagram and Course Material

5. Thermodynamics, Radiation, Oscillations and Cosmology

0/96 Dr Dabour Hub Science Diagram and Course Material
Text lesson

1.4.6 Efficiency

1.4.6 Efficiency: Define efficiency as the ratio of useful output to total input, calculate it from energy or power, and explain why it is never 100% in real machines.

1What Efficiency Means2Definition · Equation · Percentage3No units
What Efficiency Means
1.4.6 Efficiency" loading= - Dr Khaled Dabour Academy⤢ Enlarge
What Efficiency Means
No real machine converts all of its input energy into useful output

so we measure how well it performs.
1 / 3Next ▶
Definition · Equation · Percentage
Definition
Efficiency is the fraction of the total energy or power supplied that is converted into useful output energy or power.
Equation
Efficiency = useful output energy ÷ total input energy

which can equally be written using power in place of energy.
Percentage
Multiplying the ratio by 100 gives a percentage

an efficiency of 0.35 is therefore 35%.
◀ Previous2 / 3Next ▶
Sankey diagram of an electric motor: 500 J electrical energy in, 120 J useful out to the right, 380 J wasted downward.
No units
Sankey diagram of an electric motor: 500 J electrical energy in, 120 J useful out to the right, 380 J wasted downward." loading= - Dr Khaled Dabour Academy⤢ Enlarge
No units
Because it is a ratio of two quantities in the same unit, efficiency has no unit and can never exceed 1 or 100%.
Machine Useful output Typical wasted energy
Filament lamp Light Thermal energy
Electric motor Kinetic energy of the load Thermal energy and sound
Petrol engine Kinetic energy of the vehicle Thermal energy in exhaust and engine
◀ Previous3 / 3
1Why Energy Is Wasted2Why Energy Is Wasted
Why Energy Is Wasted
Why Energy Is Wasted
Moving parts rub together, doing work against friction that raises the temperature of the parts and surroundings.
Work done against drag on moving objects transfers kinetic energy to the air as thermal energy.
Current in wires and components heats them because of resistance

which wastes some of the electrical energy.
Vibrating parts send energy into the air as sound waves

which is usually unwanted in machines.
A system with high efficiency turns most of its input energy into useful output

while low efficiency means most is wasted.
The energy in an efficiency calculation can take any form, such as gravitational potential energy or kinetic energy.
1 / 2Next ▶
Why Energy Is Wasted
Why Energy Is Wasted
In an electric heater, the heat is the useful output

so the sound it makes counts as wasted energy.
◀ Previous2 / 2
1Improving Efficiency2Improving Efficiency3Improving Efficiency
Improving Efficiency
1

1
2

Identify where the largest energy losses occur, for example in friction, heating or sound.
3

2
4

Reduce friction by lubricating moving parts or using bearings so that less work is done against it.
5

3
6

Use streamlined shapes or lower speeds to reduce the work done against air resistance.
1 / 3Next ▶
Improving Efficiency
Improving Efficiency
4
Use thicker wires or better conductors to reduce thermal losses in electrical circuits.
5
Recover waste energy where possible, for example by using heat from exhaust gases, and recalculate the efficiency.
◀ Previous2 / 3Next ▶
Three devices in series with energy arrows between them (100 J, 80 J, 48 J, 43.2 J) and downward wasted-energy arrows at each device.
Improving Efficiency
◀ Previous3 / 3
Worked Example
Worked Example
Question: An electric lift motor has an input power of 2.0 kW. It raises a 150 kg load at a steady speed of 1.2 m/s. Calculate the efficiency of the system. (g = 9.81 N/kg)
Useful power output = Fv = mgv = 150 × 9.81 × 1.2 = 1765.8 W.
Total input power = 2000 W.
Efficiency = 1765.8 ÷ 2000 = 0.883.
Answer: Efficiency ≈ 0.88 or 88%
11.4.6 – Main ideas for the Exam2Common Mistakes
1.4.6 – Main ideas for the Exam
1.4.6 – Main ideas for the Exam
Efficiency: The ratio of useful energy or power output to total energy or power input.
Useful output: The part of the output energy that does the job the machine was designed to do.
Wasted energy: Energy transferred to the surroundings in a form that is not useful, usually thermal energy.
Dissipation: The spreading of energy into the surroundings.
1 / 2Next ▶
Common Mistakes
1

Stating that energy is destroyed in a machine

it is transferred to the surroundings as wasted energy.
2

Dividing input by output instead of output by input

giving a value greater than 1.
3

Mixing energy in joules for one quantity with power in watts for the other.
4

Quoting an efficiency of more than 100%

which would break conservation of energy.
◀ Previous2 / 2
Accepted payment methods