Curriculum
Course: Edexcel IAL Physics (IAS & A2)
Login

Curriculum

Edexcel IAL Physics (IAS & A2)

1. Mechanics and Materials

0/71 Dr Dabour Hub Science Diagram and Course Material

2. Waves and Electricity

0/108 Dr Dabour Hub Science Diagram and Course Material

3. Practical Skills in Physics I

0/52 Dr Dabour Hub Science Diagram and Course Material

4. Further Mechanics, Fields and Particles

0/90 Dr Dabour Hub Science Diagram and Course Material

5. Thermodynamics, Radiation, Oscillations and Cosmology

0/96 Dr Dabour Hub Science Diagram and Course Material
Text lesson

3.2.5 Using a Micrometer

3.2.5 Using a Micrometer — EDEXCEL IAL PHYSICS (IAS & A2) notes: Read a micrometer screw gauge correctly, correct for zero error and use it to measure small diameters.

1The instrument2The instrument
The instrument
The instrument
Micrometer screw gauge
a tool for measuring small widths, thicknesses or diameters, such as the diameter of a copper wire.
0.01 mm.
The main scale on the sleeve (barrel).
The thimble scale, a rotating scale with 50 divisions.
Thimble divisions one turn of the thimble advances the spindle 0.50 mm

so each division is 0.01 mm.
1 / 2Next ▶
Labelled micrometer screw gauge with sleeve and thimble scales showing a reading
The instrument
Labelled micrometer screw gauge with sleeve and thimble scales showing a reading" loading= - Dr Khaled Dabour Academy⤢ Enlarge
The instrument
Parts anvil, spindle, sleeve, thimble and ratchet.
◀ Previous2 / 2
1Taking a reading2Taking a reading3Taking a reading
Taking a reading
Taking a reading
1
Close the jaws gently using the ratchet until it clicks, and record the zero reading.
2
Clamp the object between the anvil and spindle by rotating the ratchet.
3
Tighten only until the object does not fall out but is not deformed.
1 / 3Next ▶
Taking a reading
Taking a reading
4
Read the sleeve (the last visible millimetre or half-millimetre mark).
5
Add the thimble reading

where the thimble scale aligns with the main scale, in units of 0.01 mm.
6
Subtract the zero error.
◀ Previous2 / 3Next ▶
Taking a reading
Taking a reading
Ratchet only

never tighten the spindle using the barrel, which causes overtightening and zero errors.
◀ Previous3 / 3
1Decimal places · Significant figures · Trailing zero2Half-millimetre mark
Decimal places · Significant figures · Trailing zero
Decimal places
always two decimal places, for example 1.40 mm, not 1.4 mm.
Significant figures
a micrometer reading always has 3 significant figures.
Trailing zero
2.30 mm must keep the final zero to show 3 s.f.
1 / 2Next ▶
Half-millimetre mark
Half-millimetre mark
do not forget it, or the reading is 0.50 mm too low.
◀ Previous2 / 2
1Check · Positive zero error · Negative zero error2Record
Check · Positive zero error · Negative zero error
Check
with the jaws closed the thimble may not read exactly zero.
Positive zero error
every reading is too large

so subtract it.
Negative zero error
every reading is too small

so add its magnitude.
1 / 2Next ▶
Record
Record
note the zero error before and after the measurement.
◀ Previous2 / 2
1Several places · Two directions · Parallax2Clean
Several places · Two directions · Parallax
Several places
measure a wire at several positions along it.
Two directions
at each position measure in two perpendicular directions and take the mean.
Parallax
keep the eye level perpendicular to the scale.
1 / 2Next ▶
Clean
Clean
keep the jaws and the object free of dirt or oil.
◀ Previous2 / 2
1Area · Thin wires · Resistivity2Other uses
Area · Thin wires · Resistivity
Area
A = πd2/4

so the percentage uncertainty in A is twice that in d.
Thin wires
the 0.01 mm resolution gives the largest percentage uncertainty

so a thicker wire reduces it.
Resistivity
the diameter measurement is vital in Core Practical 7.
1 / 2Next ▶
Other uses
Other uses
thickness of paper, foil or small spheres.
Take three to five repeat readings

because repeats increase precision and show how reproducible the measurements are.
Uncertainty from repeat readings is plus or minus half the spread between the highest and lowest reading.
Averaging several readings reduces the uncertainty in the final value.
Record readings to the instrument’s resolution

so every value of one variable has the same number of decimal places.
◀ Previous2 / 2
1Micrometer screw gauge range
  • Micrometer screw gauge range ratchet mechanisms prevent overtightening,
    • allowing precise thickness measurements up to 25 millimetres across the gauge range.
2Micrometer screw gauge precision
  • A micrometer screw gauge measures linear dimensions to 0.01 mm precision, reading main barrel scale divisions and rotating thimble graduations.
3Zero error correction in micrometers
  • Before taking measurements, the anvil and spindle are closed to check for zero error,
  • which must be algebraically subtracted from all subsequent readings.
4Repeat measurements and anomalous data
  • Taking multiple repeated measurements across different orientations allows students to identify anomalies, calculate mean values,
  • and assess experimental precision.
5Zero error calibration
  • Zero error calibration checking micrometer barrel alignment when jaws are fully closed identifies systematic zero errors before taking experimental measurements.
6Timing pendulum oscillations
  • Timing pendulum oscillations counting multiple oscillations past a fiducial marker significantly reduces percentage timing uncertainty on experimental periods.
7Averaging repeat readings
  • Averaging repeat readings repeating wire diameter readings at multiple orientations along the specimen detects anomalous values before calculating mean cross-sectional area.
8Apparatus
  • The equipment needed to carry out an experiment.
9Extension
  • Increase in length over the original length.
10Anomalous reading
  • A measurement that does not fit the pattern of the other data.
11Fiducial marker
  • A fixed reference mark used to judge when an oscillating object passes its centre position.
12Potential difference
  • Work done by a unit charge passing through a component.
13Elastic limit
  • Greatest load a spring can recover from.
14Anomalous result
  • A result that does not fit the trend of the other data.
15Oscillation
  • Repeated back-and-forth motion.
16Period
  • Time for one revolution.
17Current
  • Flow of electrons in a circuit.
18Pendulum
  • A weight swinging on a string, exchanging GPE and KE.
Key terms
Term Meaning
Micrometer screw gauge An instrument measuring small lengths to 0.01 mm using a precision screw.
Thimble The rotating scale with 50 divisions, each 0.01 mm.
Ratchet A device that slips at a set force, giving consistent pressure.
Zero error The reading with the jaws closed, which should be zero.
Parallax The apparent shift in a reading caused by viewing the scale from an angle.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Forgetting the half-millimetre mark on the barrel and reading 0.50 mm too low.Avoid this
2Avoid this
Tightening the spindle by hand instead of with the ratchet, compressing the wire.Avoid this
3Avoid this
Not recording the zero error, or subtracting it with the wrong sign.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Measuring the wire only once at a single point.Avoid this
5Avoid this
Quoting the diameter to 0.001 mm when the resolution is 0.01 mm.Avoid this
◀ Previous2 / 2
Accepted payment methods