Curriculum
Login

Curriculum

AP Physics C: Mechanics

1. Kinematics

0/45Dr Dabour Hub Science Education

2. Force and Translational Dynamics

0/82Dr Dabour Hub Science Education

3. Work, Energy, and Power

0/41Dr Dabour Hub Science Education

4. Linear Momentum

0/36Dr Dabour Hub Science Education

5. Torque and Rotational Dynamics

0/49Dr Dabour Hub Science Education

6. Energy and Momentum of Rotating Systems

0/51Dr Dabour Hub Science Education

7. Oscillations

0/44Dr Dabour Hub Science Education
Text lesson

3.3 Potential Energy

AP Physics C: Mechanics · 3.3

Potential Energy

3.3 Potential energy of a system

Potential energy of a system

Lifting a massStored as potential energyReleased as it falls
Lifting a massStored as potential energyReleased as it falls
  1. A system composed of two or more objects has potential energy if the objects in that system interact with each other only through conservative forces.
  2. Potential energy is a property of the system, not of a single object, and it depends on the position or configuration of the objects within the system.
  3. It is a scalar quantity, measured in joules.
  4. The zero of potential energy is a choice made by the observer.
  5. Only changes in potential energy have physical meaning, so the observer may set the potential energy to zero at any convenient configuration, such as the floor or the natural length of a spring.
  6. The choice does not change the forces or the motion, only the numerical value of the energy.
  7. When a system contains more than two objects, its total potential energy is the sum of the potential energies of each pair of objects within the system.
3.3 Potential Energy · 1 / 7
3.3 The link between force and potential energy

The link between force and potential energy

  • For a conservative force acting along one dimension, the work done by the force equals the negative of the change in potential energy: Wc = −ΔU.
  • Taking the limit of small displacements gives the force as the negative derivative of the potential energy with respect to position: Fx = −dU(x)/dx.
  • Here Fx is the force in newtons (N), U is the potential energy in joules (J), and x is the position in metres (m).
  • The force is therefore the slope of the potential energy graph, with a minus sign.
  • The conservative force points in the direction of decreasing potential energy.
  • Where the graph of U against x is steep, the force is large; where the graph is flat, the force is zero.
  • Conversely, the potential energy at a point can be found by integrating the force, U(x) = −∫Fx dx, up to a chosen zero.
3.3 Potential Energy · 2 / 7
3.3 Equilibrium from potential energy graphs

Equilibrium from potential energy graphs

  1. A graph of the potential energy of a system against position is a useful way to describe its motion.
  2. A location of equilibrium is one where the force on the object is zero, which means that the slope dU/dx is zero.
  3. A stable equilibrium is a location at which a small displacement of an object results in a force opposite to the displacement, which accelerates the object back toward the equilibrium position.
  4. In a given dimension, stable equilibria occur at local minima of the potential energy.
  5. An unstable equilibrium is a location at which a small displacement results in a force in the same direction as the displacement, which accelerates the object away from the equilibrium.
  1. Unstable equilibria occur at local maxima of the potential energy.
  2. The second derivative tells the same story in calculus form at a stable equilibrium d2U/dx2 > 0, and at an unstable equilibrium d2U/dx2 < 0.
  3. A point where the potential energy is constant over an interval is a neutral equilibrium.
3.3 Potential Energy · 3 / 7
3.3 Potential energy of common systems

Potential energy of common systems

  1. The elastic potential energy of an ideal spring is Us = ½k(Δx)2.
  2. Here k is the spring constant in newtons per metre (N/m), and Δx is the distance the spring is stretched or compressed from its equilibrium length, in metres.
  3. The spring force is Fx = −kΔx, and this agrees with the derivative: −dUs/dx = −kΔx.
  4. The general gravitational potential energy of two approximately spherical masses m1 and m2 whose centres are a distance r apart is Ug = −Gm1m2/r.
  5. Here G = 6.67 × 10−11 N·m2/kg2 and r is measured from the centre of each mass.
  6. The potential energy is zero when the masses are infinitely far apart, and it is negative for any finite separation.
  7. Near the surface of a planet, the gravitational field is nearly constant, with magnitude g = 9.8 N/kg.
  8. The change in gravitational potential energy of an object of mass m that moves a height Δh is ΔUg = mgΔh, where Δh is positive when the object moves upward.
  9. This form is the limit of the general equation for small changes in height.
3.3 Potential Energy · 4 / 7
3.3 Worked examples

Worked examples

  1. Example 1
  2. Elastic potential energy of a spring
  3. A spring of spring constant 200 N/m is stretched by 0.15 m from its equilibrium length.
  4. Find the elastic potential energy stored in the spring and the force the spring exerts on its end.
  5. Us = ½k(Δx)2 = ½(200 N/m)(0.15 m)2 = ½(200)(0.0225) J = 2.25 J.
  6. The spring force has magnitude kΔx = (200 N/m)(0.15 m) = 30 N, directed back toward the equilibrium length.
  7. Answer
  8. The stored energy is 2.3 J (2.25 J), and the spring pulls back with a force of 30 N.
  9. Example 2
  10. Equilibrium from a potential energy function
  11. The potential energy of a particle moving along the x-axis is U(x) = 2.0x2 − 8.0x, where U is in joules and x is in metres.
  12. Find the force as a function of position, the position of equilibrium, and whether the equilibrium is stable.
  1. The force is Fx = −dU/dx = −(4.0x − 8.0) = (8.0 − 4.0x) N.
  2. Equilibrium occurs where the force is zero 8.0 − 4.0x = 0, so x = 2.0 m.
  3. The second derivative is d2U/dx2 = 4.0 J/m2, which is positive, so the point is a local minimum of U.
  4. The potential energy there is U(2.0 m) = 2.0(4.0) − 8.0(2.0) = −8.0 J.
  5. Answer
  6. Fx = (8.0 − 4.0x) N.
  7. The equilibrium is at x = 2.0 m, where U = −8.0 J, and it is stable because the potential energy has a minimum there.
  8. Example 3
  9. Change in gravitational potential energy near Earth
  10. A 5.0 kg object is lifted vertically through 3.0 m near the surface of Earth.
  11. Find the change in its gravitational potential energy, and state whether the energy of the system increases or decreases.
  1. ΔUg = mgΔh = (5.0 kg)(9.8 N/kg)(3.0 m) = 147 J.
  2. Answer
  3. The change is +1.5 × 102 J, so the potential energy of the object–Earth system increases by 147 J.
  4. Example 4
  5. Gravitational potential energy of a satellite
  6. A satellite of mass 1000 kg is at a distance of 7.0 × 106 m from the centre of Earth, which has mass 5.97 × 1024 kg.
  7. Find the gravitational potential energy of the satellite–Earth system.
  8. Ug = −Gm1m2/r = −(6.67 × 10−11)(1000)(5.97 × 1024)/(7.0 × 106) J = −5.7 × 1010 J.
  9. Answer
  10. −5.7 × 1010 J. The negative sign shows that the system is bound, and the energy is zero only at infinite separation.
3.3 Potential Energy · 5 / 7
3.3 Key terms

Key terms

3.3 Potential Energy · 6 / 7
3.3 Avoid these mistakes

Avoid these mistakes

  • Reading the force from the height of the potential energy graph instead of its slope
  • The force is −dU/dx, so a high point with a flat slope has zero force.

Giving the force the same direction as the slope

  • The conservative force points toward decreasing potential energy, so the minus sign is essential.
  • Assuming that a potential energy is zero at the position where the force is zero
  • Equilibrium is set by the slope, not by the value of U.
  • Calling a local maximum of potential energy a stable equilibrium
  • A local minimum is stable; a local maximum is unstable.

Using Δx as the length of the stretched spring

  • In Us = ½k(Δx)2, Δx is the stretch or compression measured from the equilibrium length.
Avoid→Dropping the minus sign in the gravitational potential energy Ug = −Gm1m2/r, whereas the correct value is negative at every finite separation
3.3 Potential Energy · 7 / 7
Accepted payment methods