Curriculum
Course: Chemistry 2e
Login

Curriculum

Chemistry 2e

Unit 9: Gases

0/23 Dr Dabour Hub Science Diagram and Course Material

Unit 10: Liquids and Solids

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 12: Kinetics

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 14: Acid-Base Equilibria

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 17: Electrochemistry

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 18: Representative Metals, Metalloids, and Nonmetals

0/52 Dr Dabour Hub Science Diagram and Course Material

Unit 19: Transition Metals and Coordination Chemistry

0/16 Dr Dabour Hub Science Diagram and Course Material

Unit 21: Nuclear Chemistry

0/28 Dr Dabour Hub Science Diagram and Course Material
Text lesson

1.4 Measurements

1.4 Measurements — CHEMISTRY notes: By the end of this lesson you will be able to explain the process of measurement, identify the number, unit and uncertainty of a quantity, describe the units of length, mass, volume, density, temperature and time, and perform unit conversions in the metric system and other unit systems.

1Why measurements matter2Why measurements matter
Why measurements matter
Why measurements matter
Measurements supply much of the information behind the hypotheses, theories and laws that describe how matter and energy behave, both in the large-scale (macroscopic) world we can see and in the small-scale (microscopic) world of atoms and molecules. Chemistry is an experimental science

so the quality of a measurement determines how much confidence we can place in a conclusion.
Many elements differ greatly in their chemical and physical properties

but some share similar properties. For example, many elements conduct heat and electricity wellwhile others are poor conductors. Based on conductivity, elements can be sorted into three classes: metals (good conductors), nonmetals (poor conductors) and metalloids (elements with intermediate conductivity).
The periodic table is a table of the elements that places elements with similar properties close together.
You will study it in much more detail as your course continues.
The figure below shows how the elements are grouped.
The background color of each box shows whether an element is a metal, metalloid or nonmetal,

and the color of the element symbol shows whether it is a solid, a liquid or a gas at room conditions.
1 / 2Next ▶
The periodic table arranges the elements in rows and columns according to shared properties, with a color code for metals, metalloids and nonmetals and a second color code for solids, liquids and gases. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Why measurements matter
Why measurements matter: The periodic table arranges the elements in rows and columns according to shared properties, with a color code for metals, metalloids and nonmetals and a second color code for solids, liquids and gases." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Why measurements matter
The learning objectives of this section are to explain how measurement works, to identify the three basic parts of a quantity, to describe the properties and units of length, mass, volume, density, temperature and time, and to carry out unit calculations and conversions.
◀ Previous2 / 2
1The three parts of a quantity2The three parts of a quantity
The three parts of a quantity
The three parts of a quantity
Every measurement gives three kinds of information.
The first is the magnitude, the size of the measurement

which is a number.
The second is the unit, the standard of comparison against which the number is judged.
The third is the uncertainty

which tells you how precisely the measurement was made.
The number and the unit are written out explicitly when a quantity is recorded,

but the uncertainty is represented more implicitly and is discussed later in the course.
Units are essential.
1 / 2Next ▶
The three parts of a quantity
The three parts of a quantity
For example, a 2-liter bottle of soft drink holds twice the volume of the standard 1-liter reference,

and a 0.25-pound hamburger patty weighs one-fourth of the standard 1-pound reference.
A number without a unit can be meaningless or even dangerous.
If a doctor prescribes a drug dose of “100” without stating units, the difference between 100 milligrams and 100 grams is a factor of 1000,

and the consequences can be severe.
◀ Previous2 / 2
Scientific notation
1

A number can be written in decimal form or in scientific notation (also called exponential notation)

which expresses a number as a coefficient between 1 and 10 multiplied by a power of 10. For example, the maximum takeoff weight of a Boeing 777-200ER airliner is 298,000 kgwhich can be written as 2.98 × 105 kg.
2

The mass of an average mosquito is about 0.0000025 kg

which can be written as 2.5 × 10−6 kg.
3

A positive exponent means the number is large, and a negative exponent means the number is small.
4

Link to learning: If you need more practice with scientific notation, an online review of the basics is available from the textbook publisher. The idea is simply to move the decimal point and count the places

which becomes the power of 10.
Base units of the SI system
1

The measurement units for seven fundamental properties, called base units, are fixed by international agreement.
2

They make up the International System of Units, known as SI units (from the French Le Système International d’Unités).
3

The United States National Institute of Standards and Technology (NIST) has used SI units since 1964.

Every other unit can be derived from these seven base units.
4

The four base units that matter most in this course are the meter, the kilogram, the second and the kelvin.
Property measured Name of unit Symbol of unit
Length meter m
Mass kilogram kg
Time second s
Temperature kelvin K
Electric current ampere A
Amount of substance mole mol
Luminous intensity candela cd
Unit prefixes
Unit prefixes
Everyday units are often fractions or multiples of other units.
A milk carton of 1 quart, for example, is a fraction of a gallon.
SI units work the same way

but every fraction or multiple is a power of 10. A multiple is named by adding a prefix to the base unit name.
For example, 1000 meters is called a kilometer

because the prefix kilo means one thousand (1 km = 1000 m = 103 m).
The table lists the common prefixes, their symbols and their factors.
Prefixes are used with any base unit. Notice that the symbol for milli is a lowercase m

while the symbol for mega is an uppercase Mso the case of a symbol matters.
Prefix Symbol Factor Example
femto f 10−15 1 fs = 1 × 10−15 s
pico p 10−12 1 pm = 1 × 10−12 m
nano n 10−9 4 ng = 4 × 10−9 g
micro µ 10−6 1 µL = 1 × 10−6 L
milli m 10−3 2 mmol = 2 × 10−3 mol
centi c 10−2 7 cm = 7 × 10−2 m
deci d 10−1 1 dL = 1 × 10−1 L
kilo k 103 1 km = 1 × 103 m
mega M 106 3 MHz = 3 × 106 Hz
giga G 109 8 Gyr = 8 × 109 yr
tera T 1012 5 TW = 5 × 1012 W
1Length2Length
Length
1

The standard unit of length in both the SI system and the original metric system is the meter (m).
2

The meter was originally defined as one ten-millionth of the distance from the North Pole to the equator.
3

It is now defined as the distance light travels in a vacuum in 1/299,792,458 of a second.
4

A meter is about 3 inches longer than a yard, and it equals about 39.37 inches or 1.094 yards.
1 / 2Next ▶
Relative lengths of one meter, one yard, one centimeter and one inch, with rulers marked in centimeters, inches and feet to show that 2.54 cm equals one inch and one meter is about 1.094 yards. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Length
Length: Relative lengths of one meter, one yard, one centimeter and one inch, with rulers marked in centimeters, inches and feet to show that 2.54 cm equals one inch and one meter is about 1.094 yards." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Length
Longer distances are usually reported in kilometers

where 1 km = 1000 m = 103 m. Shorter distances are often reported in centimeterswhere 1 cm = 0.01 m = 10−2 m, or in millimeterswhere 1 mm = 0.001 m = 10−3 m.
◀ Previous2 / 2
1Mass2Mass
Mass
Mass
The standard SI unit of mass is the kilogram (kg).
The kilogram was first defined as the mass of one liter of pure water.
Later it was defined by a metal cylinder made of a platinum-iridium alloy, with both height and diameter of 39 mm.
In May 2019 the definition was changed again

so that it now rests on precisely measured values of several fundamental physical constants.
One kilogram is about 2.2 pounds.
The gram (g) is exactly one thousandth of a kilogram

which is 10−3 kg.
1 / 2Next ▶
A replica of the former standard kilogram, a metal cylinder kept under a glass cover to protect it from dust and handling. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Mass
◀ Previous2 / 2
Temperature
1

Temperature is an intensive property

which means it does not depend on the amount of sample you have. The SI unit of temperature is the kelvin (K). The IUPAC convention is to write the word as “kelvin” in lowercase, the unit symbol as an uppercase K, and to use neither the word “degree” nor the degree symbol with kelvin.
2

The degree Celsius (°C) is also accepted in the SI system, and for Celsius measurements both the word “degree” and the degree symbol are used.
3

A Celsius degree has the same size as a kelvin

but the two scales place their zero points in different positions.
4

Water freezes at 273.15 K (0 °C) and boils at 373.15 K (100 °C), and normal human body temperature is about 310 K (37 °C).
5

To convert from Celsius to kelvin, add 273.15 to the Celsius value.
6

To convert from kelvin to Celsius, subtract 273.15.
Time
Time
The SI base unit of time is the second (s).
Very short and very long time intervals are expressed with the appropriate prefixes.
For example, 3 microseconds equals 0.000003 s, or 3 × 10−6 s, and 5 megaseconds equals 5,000,000 s, or 5 × 106 s.
Hours, days and years are also commonly used in everyday and scientific work.
1Volume2Volume
Volume
1

Many units are derived from the seven base units. Volume is the amount of space an object occupies. The standard SI unit of volume is the cubic meter (m3)

which is a cube with an edge length of exactly one meter. A cube of one cubic meter would hold one cubic meter of water or any other substance.
2

A more convenient unit is the liter (L)

which is the common name for the cubic decimeter (dm3).
3

A decimeter is 0.1 m, or 10 cm

so a cube with edges of one decimeter has a volume of one liter.
4

One liter is about 1.06 quarts.
5

A cubic centimeter (cm3) is the volume of a cube with edges of one centimeter.
6

Health professionals often abbreviate it as cc.
1 / 2Next ▶
Cubes of one cubic meter, one cubic decimeter (one liter) and one cubic centimeter (one milliliter), with a dime shown beside a one-centimeter cube to compare their sizes. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Volume
Volume: Cubes of one cubic meter, one cubic decimeter (one liter) and one cubic centimeter (one milliliter), with a dime shown beside a one-centimeter cube to compare their sizes." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Volume
A cubic centimeter equals one milliliter (mL)

which is one thousandth of a liter.
Therefore 1 m3 = 1000 L and 1 L = 1000 mL.
◀ Previous2 / 2
Density
Density
Density is derived from the base units of mass and length.
The density of a substance is the ratio of the mass of a sample to its volume

so density = mass ÷ volume.
The SI unit of density is the kilogram per cubic meter (kg/m3).
Because this unit is inconvenient for everyday work, we usually express the densities of solids and liquids in grams per cubic centimeter (g/cm3) and the densities of gases in grams per liter (g/L).
Most liquids and solids have densities between about 0.7 g/cm3, the density of gasoline, and 19 g/cm3, the density of gold. Air has a density of about 1.2 g/L. The table lists the densities of some common substances at 25 °C and 1 atm for gases.
Density can be found by measuring the mass of a sample on a balance and its volume

which for a regular solid such as a cube can be calculated from length measurements. Dividing the mass by the volume gives the density. The worked example below shows this process.
Type Substance Density
Solid ice (at 0 °C) 0.92 g/cm3
Solid oak (wood) 0.60–0.90 g/cm3
Solid iron 7.9 g/cm3
Solid copper 9.0 g/cm3
Solid silver 10.5 g/cm3
Solid lead 11.3 g/cm3
Solid gold 19.3 g/cm3
Liquid water 1.0 g/cm3
Liquid ethanol 0.79 g/cm3
Liquid acetone 0.79 g/cm3
Liquid olive oil 0.92 g/cm3
Liquid glycerin 1.26 g/cm3
Liquid gasoline 0.70–0.77 g/cm3
Liquid mercury 13.6 g/cm3
Gas (25 °C, 1 atm) dry air 1.20 g/L
Gas (25 °C, 1 atm) helium 0.16 g/L
Gas (25 °C, 1 atm) neon 0.83 g/L
Gas (25 °C, 1 atm) nitrogen 1.14 g/L
Gas (25 °C, 1 atm) oxygen 1.31 g/L
Gas (25 °C, 1 atm) carbon dioxide 1.80 g/L
Gas (25 °C, 1 atm) radon 9.1 g/L
1Measuring density by displacement2Measuring density by displacement
Measuring density by displacement
1

An irregular object has no simple formula for its volume

so the volume can be found by displacement.
2

Place the object in a liquid of known volume.
3

The object pushes aside, or displaces, a volume of liquid equal to its own volume.
4

Subtracting the starting reading from the new reading gives the volume of the object.
5

Combined with a mass measurement, this gives its density.
6

Whether an object sinks or floats depends on buoyancy, the upward push a fluid exerts on an object placed in it. A dense object such as an iron block sinks

while a less dense object such as wood floats on the surface. To measure the volume of a floating object, it must be pushed fully beneath the surface.
1 / 2Next ▶
Measuring density by displacement
Measuring density by displacement
Link to learning: an interactive simulator lets you change the mass, volume and density of different materials and see how they relate. It is a useful way to test the ideas in this section.
◀ Previous2 / 2
1Example 1.1: Calculation of density2Example 1.1: Calculation of density · Check your learning (a3Quick conversion check · Example 1.2: Using displacement of
Example 1.1: Calculation of density
1

Gold bricks, bars and coins have been a form of currency for centuries, and dishonest sellers have sometimes filled hollow gold bricks with lead.
2

Lead is much less dense than gold (19.3 g/cm3)

so a lead-filled brick would have a lower average density.
3

Problem: a cube of lead has an edge length of 2.00 cm and a mass of 90.7 g.
4

What is its density?
5

Step 1: Find the volume. The volume of a cube is the edge length cubed

so V = (2.00 cm)3 = 8.00 cm3.
6

Step 2: Divide the mass by the volume. Density = 90.7 g ÷ 8.00 cm3 = 11.3375 g/cm3.
1 / 3Next ▶
Example 1.1: Calculation of density · Check your learning (a) · Check your learning (b)
Example 1.1: Calculation of density
Step 3: Round to the number of significant figures in the measurement. The edge length has three significant figures

so the density is 11.3 g/cm3. This matches the tabulated density of lead.
Check your learning (a)
To three decimal places, what is the volume of a cube in cm3 with an edge length of 0.843 cm? Answer: V = (0.843 cm)3 = 0.599 cm3.
Check your learning (b)
If the cube in part (a) is copper with a mass of 5.34 g, what is the density of copper to two decimal places? Answer: density = 5.34 g ÷ 0.599 cm3 = 8.91 g/cm3.
◀ Previous2 / 3Next ▶
Quick conversion check · Example 1.2: Using displacement of water to determine density
Quick conversion check
Convert 298,000 kg to scientific notation: 2.98 × 105 kg. Convert 2.5 × 10−6 kg to grams: multiply by 1000 twice, or write 2.5 × 10−3 g

which is 0.0025 g.
Example 1.2: Using displacement of water to determine density
Problem: A block of iron has a mass of 31.48 g. It is placed in water whose level reads 25.5 mL, and the level rises to 29.5 mL once the block is fully submerged and sinks. What is the density of the iron?
Solution: The displaced volume equals the volume of the block: 29.5 mL − 25.5 mL = 4.0 mL. Density = mass ÷ volume = 31.48 g ÷ 4.0 mL = 7.87 g/mL

which is the same as 7.87 g/cm3.
Check your learning: Using water displacement, find the density of a foam sample with a mass of 4.6 g that is fully submerged and displaces 20.0 mL of water. Answer: 0.230 g/mL

because 4.6 g ÷ 20.0 mL = 0.230 g/mL.
◀ Previous3 / 3
Key terms
Term Meaning
Measurement A value obtained by comparing a quantity with a standard, giving a number, a unit and an uncertainty.
Magnitude The size of a measured quantity, expressed as a number.
Unit The standard of comparison that gives a measured number its meaning.
Uncertainty An indication of how precisely a measurement was made.
Scientific notation A way of writing a number as a coefficient between 1 and 10 multiplied by a power of 10.
SI units The International System of Units, the standard system of measurement used in science.
Base unit One of the seven fundamental SI units from which all other units are derived.
Prefix A word added to a unit name to show a fraction or multiple that is a power of 10.
Meter The SI base unit of length.
Kilogram The SI base unit of mass.
Second The SI base unit of time.
Kelvin The SI base unit of temperature, with the same size as a degree Celsius but a different zero point.
Intensive property A property, such as temperature or density, that does not depend on the amount of sample.
Volume The amount of space an object occupies, measured in cubic units.
Liter The common unit of volume, equal to one cubic decimeter or 1000 mL.
Density The ratio of the mass of a sample to its volume.
Buoyancy The upward push a fluid exerts on an object placed in it, which decides whether the object sinks or floats.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes4Avoid these mistakes
Avoid these mistakes
1Avoid this
Writing a number without its unit.Avoid this
A dose of “100” is meaningless until you know whether it is milligrams or grams, because the two differ by a factor of 1000.Avoid this
2Avoid this
Confusing prefixes. A micrometer is 10Avoid this
−6Avoid this
1 / 4Next ▶
Avoid these mistakes
m and a millimeter is 10Avoid this
−3Avoid this
m, so a micrometer is one thousandth of a millimeter.Avoid this
3Avoid this
Calculating the volume of a cube as edge length squared instead of edge length cubed. Volume requires three factors of length.Avoid this
4Avoid this
◀ Previous2 / 4Next ▶
Avoid these mistakes
Inverting the density ratio. Density is mass divided by volume, not volume divided by mass, so a denser substance has a larger mass per unit volume.Avoid this
5Avoid this
Treating 1 L as 100 mL. A liter is a cubic decimeter, which is 1000 cmAvoid this
, so 1 L equals 1000 mL.Avoid this
6Avoid this
Using the degree symbol with kelvin or assuming 0 K equals 0 °C.Avoid this
◀ Previous3 / 4Next ▶
Avoid these mistakes
Zero kelvin is −273.15 °C, and water freezes at 273.15 K, not at 273 K as a Celsius zero.Avoid this
7Avoid this
Writing an exponent with the wrong sign when converting small numbers. A value of 0.0000025 kg is 2.5 × 10Avoid this
kg, not 2.5 × 10Avoid this
kg.Avoid this
◀ Previous4 / 4
Accepted payment methods