Curriculum
Course: Chemistry 2e
Login

Curriculum

Chemistry 2e

Unit 9: Gases

0/23 Dr Dabour Hub Science Diagram and Course Material

Unit 10: Liquids and Solids

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 12: Kinetics

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 14: Acid-Base Equilibria

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 17: Electrochemistry

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 18: Representative Metals, Metalloids, and Nonmetals

0/52 Dr Dabour Hub Science Diagram and Course Material

Unit 19: Transition Metals and Coordination Chemistry

0/16 Dr Dabour Hub Science Diagram and Course Material

Unit 21: Nuclear Chemistry

0/28 Dr Dabour Hub Science Diagram and Course Material
Text lesson

21.4 Transmutation and Nuclear Energy

21.4 Transmutation and Nuclear Energy — CHEMISTRY notes: You will be able to describe how new nuclides are synthesized, explain fission and fusion, relate critical mass to chain reactions, and summarize the basic requirements of fission and fusion reactors.

The Nuclear Age
The Nuclear Age
Nuclear chemistry developed quickly after the discovery of radioactivity in the early twentieth century.
New discoveries in the 1930s and 1940s, together with World War II, brought in the Nuclear Age in the middle of the century.
Scientists learned to make new substances, and certain isotopes were found to release enormous amounts of energy.
That energy can cause great destruction in war

but it can also supply large amounts of power in peacetime.
1Synthesis of Nuclides2Synthesis of Nuclides3Synthesis of Nuclides4Synthesis of Nuclides
Synthesis of Nuclides
1

Nuclear transmutation is the conversion of one nuclide into another. It can happen through the radioactive decay of a nucleus or through a reaction between a nucleus and another particle. The first artificial nucleus was produced in Ernest Rutherford’s laboratory in 1919. He bombarded nitrogen atoms with fast-moving α particles from a natural radium isotope and detected protons as products:
2

14N + 4He → 17O + 1H
3

The oxygen-17 and hydrogen-1 nuclei formed in this reaction are stable

so no further nuclear change takes place.
4

To give nuclear particles the kinetic energy needed for transmutation, scientists use particle accelerators. These machines use magnetic and electric fields to speed up nuclear particles. The particles travel through a vacuum so that they do not collide with gas molecules. When neutrons are needed, they are usually obtained from radioactive decay or from nuclear reactions in reactors.
5

The heaviest naturally occurring element was uranium (atomic number 92) before 1940. Since then many artificial elements have been made.
6

Element 93, neptunium, was first made in 1940 by bombarding uranium-238 with neutrons.
1 / 4Next ▶
Synthesis of Nuclides
Synthesis of Nuclides
The uranium-239 formed is unstable, with a half-life of 23.5 minutes, and it decays by β emission to neptunium-239.

Neptunium-239 has a half-life of 2.36 days and decays by β emission to plutonium-239:
238U + 1n → 239U + γ
239U → 239Np + 0−1β
239Np → 239Pu + 0−1β
Today most plutonium is made in nuclear reactors.
During the fission of U-235, extra neutrons are released.
◀ Previous2 / 4Next ▶
Synthesis of Nuclides
Synthesis of Nuclides
Some of them are captured by U-238 nuclei, and the two β decays described above follow.
Heavier plutonium isotopes such as Pu-240, Pu-241 and Pu-242 form when lighter plutonium nuclei capture neutrons.
Some plutonium is used to make weapons,

and the rest is a serious storage problem because its isotopes have half-lives from thousands to hundreds of thousands of years.
Many other synthetic nuclides have also been made. Nuclear medicine depends on converting one kind of atom into another. Radioactive isotopes of several dozen elements are used to image or treat parts of the body.
The elements beyond uranium (atomic number above 92) are called transuranium elements.
At the time of writing, 22 transuranium elements had been produced and officially recognized by IUPAC,

and several more claims were waiting for approval.
◀ Previous3 / 4Next ▶
Synthesis of Nuclides
1

Table 21.3 lists some of them.
2

Most are made by bombarding heavy nuclei with neutrons or with light charged particles such as helium nuclei.
Name Symbol Atomic number
Americium Am 95
Curium Cm 96
Californium Cf 98
Einsteinium Es 99
Mendelevium Md 101
Nobelium No 102
Rutherfordium Rf 104
Seaborgium Sg 106
Meitnerium Mt 107
◀ Previous4 / 4
1Chemistry in Everyday Life: CERN Particle Accelerator2Chemistry in Everyday Life: CERN Particle Accelerator
Chemistry in Everyday Life: CERN Particle Accelerator
1

The CERN laboratory near Geneva studies the fundamental particles that make up matter.
2

Its Large Hadron Collider (LHC) is a 27-kilometre circular ring and the largest particle accelerator in the world.
3

Particles are accelerated to nearly the speed of light and made to collide with each other or with fixed targets.
4

Superconducting electromagnets create a strong magnetic field that guides the particles around the ring.
5

Detectors record the results of the collisions, and scientists analyze them with powerful computers.
1 / 2Next ▶
A section of the Large Hadron Collider, with workers walking along the tunnel beside the beam pipe, shows the scale of the machine. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Chemistry in Everyday Life: CERN Particle Accelerator
Chemistry in Everyday Life: CERN Particle Accelerator: A section of the Large Hadron Collider, with workers walking along the tunnel beside the beam pipe, shows the scale of the machine." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Chemistry in Everyday Life: CERN Particle Accelerator
In 2012 CERN announced the first observations of the Higgs boson, an elementary particle that helps explain why fundamental particles have mass. The discovery led to the 2013 Nobel Prize in Physics for François Englert and Peter Higgs, who had predicted the particle almost 50 years earlier.
Link to Learning: the online material on CERN explains how its accelerators work and what the physics behind them is about.
◀ Previous2 / 2
1Nuclear Fission2Nuclear Fission3Nuclear Fission4Nuclear Fission5Nuclear Fission6Nuclear Fission
Nuclear Fission
1

Nuclear fission is the breaking of a heavy nucleus into smaller pieces.
2

Heavy nuclei have smaller binding energies per nucleon than nuclei near the middle of the periodic table.
3

When they split, the products have mass numbers closer to the peak of the binding-energy curve (near mass number 56) and are more stable.
4

Neutrons are often released as well.
5

The breakup is fairly random and gives a large number of different products.
6

Fission does not usually happen naturally

it is induced by bombarding the nucleus with neutrons.
1 / 6Next ▶
A slow neutron is absorbed by a U-235 nucleus to form an unstable U-236 nucleus, which splits into barium-141 and krypton-92 and releases neutrons and a large amount of energy. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Nuclear Fission
Nuclear Fission: A slow neutron is absorbed by a U-235 nucleus to form an unstable U-236 nucleus, which splits into barium-141 and krypton-92 and releases neutrons and a large amount of energy." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Nuclear Fission
The first reported fission was in 1939, when Lise Meitner, Otto Hahn and Fritz Strassmann bombarded uranium atoms with slow neutrons. Their products included barium, krypton, lanthanum and cerium, all with nuclei more stable than uranium-235. Fission has since been observed in many isotopes, including most actinides with an odd number of neutrons.
A typical fission of U-235 is:
235U + 1n → 141Ba + 92Kr + 3 1n
Many different pairs of fission products are possible. Their yields are plotted against mass number, and the largest products are usually one isotope with a mass number of about 85–105 and another about 50% larger, around 130–150.
◀ Previous2 / 6Next ▶
A chart of the fission products of U-235 shows that the yield is highest for two groups of isotopes, one near mass number 90 and one near mass number 140. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Nuclear Fission
Nuclear Fission: A chart of the fission products of U-235 shows that the yield is highest for two groups of isotopes, one near mass number 90 and one near mass number 140." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Nuclear Fission
The energy released by fission is very large.
When one mole of U-235 undergoes fission, the products have about 0.2 g less mass than the reactants.
This lost mass becomes energy, about 1.8 × 1010 kJ per mole of U-235. Fission releases far more energy than chemical reactions.
Burning 1 kg of coal gives about 2.5 million times less energy than fissioning 1 kg of U-235.
In fission, U-235 produces two medium-sized nuclei and two or three neutrons. These neutrons can cause fission in other U-235 nuclei

which release more neutrons, and so on. This is a nuclear chain reaction. If too many neutrons escape the sample without hitting a nucleus, no chain reaction takes place.
◀ Previous3 / 6Next ▶
Each fission of a U-235 nucleus releases neutrons that can split further nuclei, so the process can continue as a chain. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Nuclear Fission
Nuclear Fission: Each fission of a U-235 nucleus releases neutrons that can split further nuclei, so the process can continue as a chain." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

Fissile material can sustain a chain reaction.
2

Strictly, fissile material can fission with neutrons of any energy

while fissionable material needs high-energy neutrons.
3

A fission reaction becomes self-sustaining when the neutrons produced equal or exceed the neutrons absorbed plus those that escape.
4

The smallest amount of fissionable material that can keep a chain reaction going is the critical mass.
5

An amount that cannot sustain a chain reaction is a subcritical mass, and an amount whose fission rate keeps increasing is a supercritical mass.
6

The critical mass depends on the material’s purity, its temperature, its shape and how neutron reactions are controlled.
◀ Previous4 / 6Next ▶
In a subcritical sample most neutrons escape and the chain stops, while in a critical sample enough neutrons stay inside to keep fissioning other nuclei. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Nuclear Fission
Nuclear Fission: In a subcritical sample most neutrons escape and the chain stops, while in a critical sample enough neutrons stay inside to keep fissioning other nuclei." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

An atomic bomb holds several kilograms of fissionable material or a neutron source, together with an explosive that compresses the material quickly into a small volume.
2

In small pieces, most neutrons escape through the large surface area

so no chain reaction occurs.
3

When small pieces are pushed together into a mass above the critical mass, fewer neutrons escape and a chain reaction and explosion follow.
◀ Previous5 / 6Next ▶
The Hiroshima bomb fired one subcritical uranium mass into another, while the Nagasaki bomb compressed a hollow plutonium sphere inward with conventional explosives. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Nuclear Fission
Nuclear Fission: The Hiroshima bomb fired one subcritical uranium mass into another, while the Nagasaki bomb compressed a hollow plutonium sphere inward with conventional explosives." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Nuclear Fission
The Hiroshima bomb used two subcritical masses of U-235. Conventional explosives fired one into the other to form a critical mass. The Nagasaki bomb used a hollow sphere of plutonium that was rapidly compressed by conventional explosives

which raised the central plutonium concentration above the critical mass.
◀ Previous6 / 6
1Fission Reactors2Fission Reactors
Fission Reactors
1

Fission chain reactions can be controlled and sustained without an explosion in a nuclear reactor.
2

Any reactor that produces power from the fission of uranium or plutonium needs at least five components: nuclear fuel of fissionable material, a moderator, a coolant, control rods,

and a shield and containment system.
3

The reactor keeps the fissionable material separated so that a critical mass cannot form.
4

It also controls the flux and absorption of neutrons so that fission can be shut down.
5

In an electricity-generating reactor, the heat from fission boils water to make steam.
6

The steam turns a turbine, and the turbine drives a generator.
1 / 2Next ▶
A nuclear power plant with its reactor domes (a), and a diagram of a pressurized water reactor (b) in which heat from the core makes steam for a turbine. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Fission Reactors
Fission Reactors: A nuclear power plant with its reactor domes (a), and a diagram of a pressurized water reactor (b) in which heat from the core makes steam for a turbine." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Fission Reactors
In the pressurized water reactor shown, heat from the core passes to a closed, pressurized water loop. That loop heats a second water supply to steam

which drives the turbine.
◀ Previous2 / 2
1Nuclear Fuels2Nuclear Fuels3Nuclear Fuels
Nuclear Fuels
Nuclear Fuels
Nuclear fuel must contain enough fissionable isotope, such as U-235, to sustain a chain reaction.
Uranium ore contains only 0.05–0.3% uranium oxide U3O8.
The uranium in the ore is about 99.3% U-238

which cannot sustain fission, and only about 0.7% U-235.Reactors need fuel with more U-235 than natural uranium, normally enriched to about 5% U-235 by mass.
At this level a supercritical mass for an explosion cannot be reached.
Uranium can be enriched by gaseous diffusion (the only method used in the US so far), by gas centrifuge, or by laser separation.
In a gaseous diffusion plant, uranium hexafluoride gas (UF6) at low pressure moves through barriers with holes just large enough for the gas to pass.
1 / 3Next ▶
Nuclear Fuels
1

The lighter 235UF6 molecules diffuse slightly faster than the heavier 238UF6 molecules.
2

Repeating this through hundreds of barriers increases the U-235 concentration.
3

The principle is Graham’s law of effusion.
4

The enriched gas is cooled until it solidifies and is sent to a fabrication plant.
5

There it is made into fuel assemblies of fuel rods, each packed with ceramic-encased uranium dioxide (UO2) pellets.
6

A modern reactor may contain up to 10 million pellets.
◀ Previous2 / 3Next ▶
Nuclear Fuels
Nuclear Fuels
Each pellet holds as much energy as almost a ton of coal or about 150 gallons of oil.
◀ Previous3 / 3
Nuclear Moderators
Nuclear Moderators
Neutrons from nuclear reactions move too fast to cause fission efficiently.
A nuclear moderator slows them to a speed at which the fuel can absorb them and fission can continue.
Early reactors used high-purity graphite.
Modern US reactors use heavy water (D2O) or ordinary light water (H2O).
Some reactors in other countries use carbon dioxide, beryllium or graphite.
Reactor Coolants
Reactor Coolants
A reactor coolant carries the heat from fission to an external boiler and turbine

where it is converted to electricity. Two overlapping coolant loops are often usedwhich reduces the transfer of radioactivity into the primary loop. All US nuclear plants use water as coolant. Other coolants include molten sodium, lead, a lead–bismuth mixture and molten salts.
The reactor core contains fuel rods and control-rod assemblies, which can be lowered between the fuel to absorb neutrons. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Control Rods
Control Rods: The reactor core contains fuel rods and control-rod assemblies, which can be lowered between the fuel to absorb neutrons." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Control Rods
Control rods regulate the fission rate by adjusting the number of slow neutrons in the core. They are made of elements that absorb neutrons well, such as boron, cadmium or hafnium. Boron-10 absorbs a neutron and produces lithium-7 and an α particle:
10B + 1n → 7Li + 4He
When control rods are pushed into the core, they absorb more slow neutrons

so the fission rate and the power output fall. When they are withdrawn, fewer neutrons are absorbed and the power rises. In an emergency, all control rods can be fully inserted between the fuel rods to stop the chain reaction.
1Shield and Containment System2Shield and Containment System
Shield and Containment System
Shield and Containment System
An operating reactor produces neutrons and other radiation. Even after shutdown, the decay products stay radioactive. The reactor is very hot, and the coolant circulating through it creates high pressure. So the reactor must withstand high temperature and pressure and protect operators from radiation. Its containment system has three parts:
1 / 2Next ▶
Shield and Containment System
1

The reactor vessel, a steel shell 3–20 cm thick that, together with the moderator, absorbs much of the radiation.
2

A main shield of 1–3 m of high-density concrete.
3

A personnel shield of lighter materials that protects operators from γ rays and X-rays.
4

Reactors are often covered by a steel or concrete dome that contains any radioactive material released in an accident. Link to Learning: a short video from the Nuclear Energy Institute explains how reactors work.
◀ Previous2 / 2
1Chemistry in Everyday Life: Nuclear Accidents2Chemistry in Everyday Life: Nuclear Accidents3Chemistry in Everyday Life: Nuclear Accidents4Chemistry in Everyday Life: Nuclear Accidents5Chemistry in Everyday Life: Nuclear Accidents
Chemistry in Everyday Life: Nuclear Accidents
1

Nuclear power plants are designed so that they cannot form a supercritical mass and cannot explode like a bomb. Failures of systems and safeguards can still cause serious accidents, including chemical explosions and meltdowns

which are damage to the reactor core from overheating. Three major accidents show how important cooling and containment are.
2

Three Mile Island (United States, March 1979). The cooling system of Unit 2 failed and water spilled onto the floor of the containment building.
3

The pumps stopped, and the core overheated because of decay heat from the shut-down reactor.
4

The core reached at least 2200 °C, and its upper part began to melt.
5

The zirconium alloy cladding reacted with steam and made hydrogen:
6

Zr + 2 H2O → ZrO2 + 2 H2
1 / 5Next ▶
Chemistry in Everyday Life: Nuclear Accidents
Chemistry in Everyday Life: Nuclear Accidents
Hydrogen collected in the building

so hydrogen and radioactive gases, mainly krypton and xenon, were vented.
Within a week cooling water was restored.
The plant was closed for nearly 10 years during cleanup.
Noble gases disperse readily in air and are not taken up by living things

so they do not leave highly contaminated areas.
Almost none of the core’s heavy elements escaped, and no outside cleanup was needed.
◀ Previous2 / 5Next ▶
The damaged Unit 2 reactor at Three Mile Island remains beside the undamaged Unit 1, and a president visited the control room days after the accident. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Chemistry in Everyday Life: Nuclear Accidents
Chemistry in Everyday Life: Nuclear Accidents: The damaged Unit 2 reactor at Three Mile Island remains beside the undamaged Unit 1, and a president visited the control room days after the accident." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

Chernobyl (Ukraine, April 1986). During an unauthorized low-power experiment with safety devices switched off, the reactor became unstable.
2

Its chain reaction became uncontrollable.
3

Steam pressure rose to 100 to 500 times the designed level and ruptured the reactor.
4

There was no containment building

so large amounts of radioactive material escaped, and burning graphite moderator released more fission products.
5

More than 200 workers and firefighters suffered acute radiation sickness, and at least 32 died soon after.
6

About 4000 further deaths are predicted from radiation-induced cancer and leukemia.
◀ Previous3 / 5Next ▶
Chemistry in Everyday Life: Nuclear Accidents
Chemistry in Everyday Life: Nuclear Accidents
The reactor was sealed in steel and concrete, and the area still has significant radiation problems.
Fukushima Daiichi (Japan, 2011). A 9.0-magnitude earthquake and tsunami shut down three operating reactors, and emergency generators started.
The tsunami flooded the generators and stopped the pumps that circulated coolant.
Steam reacted with zirconium alloy to form hydrogen

which entered the containment buildingwhere the hydrogen–air mixture exploded.
Radioactive material was released through deliberate venting, deliberate discharge of cooling water to the sea, and uncontrolled events.
An evacuation zone extended more than 12 miles, and about 200,000 people were moved.
◀ Previous4 / 5Next ▶
After the accident, contaminated waste had to be removed, and an evacuation zone was set up around the plant where fallout was heaviest. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Chemistry in Everyday Life: Nuclear Accidents
Chemistry in Everyday Life: Nuclear Accidents: After the accident, contaminated waste had to be removed, and an evacuation zone was set up around the plant where fallout was heaviest." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Chemistry in Everyday Life: Nuclear Accidents
All 48 of Japan’s nuclear plants were shut down and remained so at the end of 2014.

Public opinion turned from largely favoring nuclear power to largely opposing its expansion,and restarting Japan’s program was still stalled.
Link to Learning: the material on nuclear waste management describes the approaches being used to handle spent fuel.
◀ Previous5 / 5
1Spent fuel2Spent fuel
Spent fuel
1

Only about 0.1% of the fuel mass is converted to energy in a reactor.
2

The other 99.9% stays in the rods as fission products and unused fuel.
3

Fission products absorb neutrons

so after a few months to a few years, depending on the reactor, the rods must be replaced.
4

Otherwise the fission products would absorb so many neutrons that the reactor could not run.
5

Spent rods contain unstable nuclei with atomic numbers from 25 to 60, some transuranium isotopes such as plutonium and americium, and unused uranium.
6

These make the spent fuel dangerously radioactive, and the long-lived isotopes take thousands of years to decay to safe levels.
1 / 2Next ▶
Spent fuel
Spent fuel
Whether nuclear power remains a major energy source in the United States depends on whether a politically and scientifically acceptable method for processing and storing spent fuel can be developed.
◀ Previous2 / 2
1Nuclear Fusion and Fusion Reactors2Nuclear Fusion and Fusion Reactors3Nuclear Fusion and Fusion Reactors4Nuclear Fusion and Fusion Reactors5Nuclear Fusion and Fusion Reactors6Energy per mole of helium formed7Energy from the mass lost in fission
Nuclear Fusion and Fusion Reactors
Nuclear Fusion and Fusion Reactors
Nuclear fusion joins very light nuclei into heavier ones.
Like fission, it converts a small amount of mass into a large amount of energy.
The Sun is powered by a net reaction in which four hydrogen nuclei fuse to form one helium nucleus and two positrons.
A helium nucleus has about 0.7% less mass than four hydrogen nuclei, and that lost mass becomes energy.
Fusion of heavy hydrogen isotopes, deuterium (2H) and tritium (3H), needs extremely high temperatures

which is why it is called thermonuclear fusion. It forms helium and a neutron:
2H + 3H → 4He + 1n
1 / 7Next ▶
Nuclear Fusion and Fusion Reactors
1

1
2

The temperature must be about 15,000,000 K or higher so that the nuclei have enough kinetic energy to overcome their strong electrical repulsion and collide.
3

At such temperatures molecules dissociate into atoms and the atoms ionize, forming a plasma.
4

Stars are powered by fusion, and thermonuclear weapons use a fission bomb to supply the temperature needed for fusion.
5

2
6

A fusion reactor is a reactor in which fusion of light nuclei is controlled.
◀ Previous2 / 7Next ▶
Nuclear Fusion and Fusion Reactors
Nuclear Fusion and Fusion Reactors
No solid material can withstand such temperatures

so mechanical containment cannot hold the plasma.
Two main research approaches contain the plasma: magnetic fields and focused laser beams.
The major goal is ignition

where the hydrogen fuel produces more energy than is supplied to heat and compress it.
At the time of writing, no self-sustaining fusion reactor was operating,
although small controlled fusion reactions had been run for brief periods.
3
◀ Previous3 / 7Next ▶
Nuclear Fusion and Fusion Reactors
Nuclear Fusion and Fusion Reactors
The magnetic approach uses a tokamak, a doughnut-shaped chamber in which powerful magnetic fields hold the hot plasma away from the walls.
The ITER reactor, under construction in the south of France, is a large tokamak that is designed to be the world’s largest experimental fusion reactor, with a goal of large-scale sustained energy production.
Its completion was expected around 2027.
4
The laser approach compresses a small target of fusion fuel with many focused laser beams.
In 2012 the National Ignition Facility at Lawrence Livermore National Laboratory used 192 lasers to deliver about 1.85 MJ of laser energy in a few billionths of a second.
◀ Previous4 / 7Next ▶
Nuclear Fusion and Fusion Reactors
1

The peak power was about 500 terawatts, more than 1000 times the power usage of the entire United States at any given moment.
2

This was the largest laser energy ever produced, and the target briefly reached the conditions needed for fusion ignition.
3

Worked example: energy from the deuterium–tritium reaction.
◀ Previous5 / 7Next ▶
Energy per mole of helium formed
1

The reaction loses 0.0188 u of mass per helium nucleus formed.
2

Convert to kilograms: 0.0188 u × 1.6605 × 10−27 kg/u = 3.12 × 10−29 kg.
3

Apply E = mc2: E = 3.12 × 10−29 kg × (3.00 × 108 m/s)2 = 2.81 × 10−12 J per nucleus.
4

For one mole, multiply by 6.022 × 1023: 1.69 × 1012 J, or 1.69 × 109 kJ per mole of helium.
◀ Previous6 / 7Next ▶
Energy from the mass lost in fission
Energy from the mass lost in fission
One mole of U-235 loses about 0.2 g in fission. E = mc2 = (0.2 × 10−3 kg)(3.00 × 108 m/s)2 = 1.8 × 1013 J = 1.8 × 1010 kJ

which matches the value quoted above.
◀ Previous7 / 7
Key terms
Term Meaning
Nuclear transmutation The conversion of one nuclide into another, by radioactive decay or by a reaction with another particle.
Particle accelerator A device that uses magnetic and electric fields to speed up nuclear particles so that they can cause transmutation reactions.
Transuranium element An element with an atomic number greater than 92 (uranium).
Nuclear fission The breaking of a large nucleus into smaller nuclei, usually with the release of neutrons and energy.
Nuclear chain reaction A sequence of fission reactions in which the neutrons from one fission cause further fissions.
Fissile (fissionable) material A material that can sustain a fission chain reaction.
Critical mass The smallest amount of fissionable material that can sustain a self-sustaining chain reaction.
Subcritical mass An amount of fissionable material too small to sustain a chain reaction.
Supercritical mass An amount of fissionable material in which the rate of fission keeps increasing.
Nuclear reactor A device in which fission chain reactions are controlled and sustained to produce energy.
Enrichment The process of increasing the fraction of U-235 in uranium fuel above its natural level of about 0.7%.
Nuclear moderator A substance that slows neutrons to a speed low enough to cause fission.
Reactor coolant A fluid that carries the heat from fission to a boiler and turbine.
Control rod A rod of a neutron-absorbing element, such as boron, that is moved in or out of the core to control the fission rate.
Containment system The shielding and structures that protect operators and the environment from radiation and pressure in a reactor.
Meltdown Damage to a reactor core caused by overheating.
Nuclear fusion The joining of very light nuclei into a heavier nucleus with a release of energy.
Plasma A state of matter at very high temperature in which atoms are ionized into free nuclei and electrons.
Fusion reactor A reactor in which fusion reactions of light nuclei are controlled.
Tokamak A doughnut-shaped fusion reactor design that uses strong magnetic fields to confine a hot plasma.
Fusion ignition The point at which a fusion reaction produces more energy than is supplied to heat and compress the fuel, so that it can sustain itself.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes
Avoid these mistakes
1Avoid this
Writing a nuclear equation without balancing both mass numbers and atomic numbers. Each side must have the same total of each.Avoid this
2Avoid this
Thinking that fission happens spontaneously in every heavy nucleus. Most heavy nuclei need a neutron to start fission.Avoid this
3Avoid this
Confusing critical mass with the size of a bomb. Critical mass only means the sample can sustain a chain reaction.Avoid this
1 / 3Next ▶
Avoid these mistakes
4Avoid this
Assuming a nuclear reactor can explode like a nuclear bomb. Reactor fuel is enriched to about 5% U-235, which cannot form a supercritical mass.Avoid this
5Avoid this
Using the mass-energy relation with the wrong units. Convert grams to kilograms and use c in m/s before calculating energy in joules.Avoid this
6Avoid this
Saying that the moderator is the fuel or that control rods make the reactor produce more power.Avoid this
◀ Previous2 / 3Next ▶
Avoid these mistakes
The moderator slows neutrons, and control rods absorb them to reduce power.Avoid this
◀ Previous3 / 3
Accepted payment methods