Curriculum
Login

Curriculum

Chemistry 2e

Unit 18

0/26Dr Dabour Hub Science Education
Text lesson

5.1 Energy Basics

Chemistry 2e · 5.1

Energy Basics

5.1 Learning objectives

Learning objectives

  1. Learning objectives
  2. Learning objectives
  3. Learning objectives
  4. Define energy, distinguish its types, and describe the energy changes that accompany chemical and physical changes.
  5. Distinguish the related properties of heat, thermal energy and temperature.
  6. Define and distinguish specific heat and heat capacity, and describe the physical implications of both.
  7. 1 / 2Next ▶
  8. Learning objectives
  9. Perform calculations involving heat, specific heat and temperature change.
  10. ◀ Previous, 2 / 2
5.1 Energy Basics · 1 / 14
5.1 Energy changes in everyday life

Energy changes in everyday life

Energy changes in everyday life: Three everyday examples of chemical energy: a meal that fuels the body, gasoline burning in a car engine, and coke used to make iron from ore.
Energy changes in everyday life: Three everyday examples of chemical energy: a meal that fuels the body, gasoline burning in a car engine, and coke used to make iron from ore.
Energy changes in everyday life2→Energy changes in everyday life3Energy changes in everyday life

Energy changes in everyday life

Energy changes in everyday life

  • Chemical changes and the energy that goes with them are part of everyday life.
  • The macronutrients in food (proteins, fats and carbohydrates) undergo metabolic reactions that supply the energy that keeps the body working.
  • Fuels such as gasoline, natural gas and coal are burned to power transportation, heat buildings and generate electricity.
  • Industrial chemical reactions consume large amounts of energy to produce raw materials such as iron and aluminum,
  • and that energy is then used to turn those materials into cars, skyscrapers and bridges.

1 / 3Next ▶

Three everyday examples of chemical energy→a meal that fuels the body, gasoline burning in a car engine, and coke used to make iron from ore. Image: OpenStax, Chemistry 2e, CC BY 4.0.

Energy changes in everyday life

⤢ Enlarge

Energy changes in everyday life

  • Almost all the energy people use started as sunlight.
  • Each day the sun delivers to the earth roughly 10,000 times the energy that the world needs in that day.
  • The challenge is to convert and store that solar energy in forms that can be used conveniently and without pollution.
  • Plants and many bacteria capture solar energy through photosynthesis,
  • and that stored energy is released when wood or plant products such as ethanol are burned,when we eat plants or animals that ate plants,and when coal and petroleum are burned,because these fuels are fossilized plant and animal matter.
  • The field that studies the heat absorbed or released during chemical and physical changes is called thermochemistry.
  • Its ideas are used by food scientists who measure the energy content of foods, by biologists who study the energetics of living organisms such as the metabolic burning of sugar to carbon dioxide and water, by engineers who improve energy efficiency and design heating, cooling and refrigeration systems,
  • and by the oil, gas, transportation and renewable energy industries.

◀ Previous, 2 / 3Next ▶

Energy changes in everyday life

Energy changes in everyday life

  1. Understanding thermochemistry is essential for chemists
  2. physicists
  3. biologists
  4. geologists and engineers.

◀ Previous, 3 / 3

5.1 Energy Basics · 2 / 14
5.1 Energy

Energy

Energy

Energy

  • Energy is the capacity to supply heat or to do work.
  • Work (w) is the process of causing matter to move against an opposing force.
  • For example, when a bicycle tire is inflated, the pump moves air against the opposing force of the air already in the tire
  • so work is done.
5.1 Energy Basics · 3 / 14
5.1 Types of energy

Types of energy

Types of energy: Water at a high elevation has more potential energy than water at a low elevation, and its energy becomes electrical energy when it turns the generators of a dam.
Types of energy: Water at a high elevation has more potential energy than water at a low elevation, and its energy becomes electrical energy when it turns the generators of a dam.
Types of energy2→Types of energy

Types of energy

Types of energy

  • Energy comes in different types.
  • One way to classify it is into two kinds.
  • Potential energy is the energy an object has because of its position, composition or condition.
  • Kinetic energy is the energy an object has because of its motion.
  • Water at the top of a waterfall or behind a dam has potential energy because of its height.
  • As it falls and flows through generators, that potential energy becomes kinetic energy,
  • which can be converted into electricity in a hydroelectric plant.
  • A battery also has potential energy, stored in its chemicals, that can be released as electricity to do work.

1 / 2Next ▶

  • Water at a high elevation has more potential energy than water at a low elevation, and its energy becomes electrical energy when it turns the generators of a dam.
  • Image: OpenStax, Chemistry 2e, CC BY 4.0.

Types of energy

⤢ Enlarge

◀ Previous, 2 / 2

5.1 Energy Basics · 4 / 14
5.1 Conservation of energy

Conservation of energy

Conservation of energy2→Conservation of energy

Conservation of energy

Conservation of energy

Energy can be changed from one form into another

  • but the total energy present before a change is still present afterwards in some form.
  • This is the law of conservation of energy during a chemical or physical change, energy can be neither created nor destroyed,
  • although it can change form.
  • This statement is also one version of the first law of thermodynamics
  • which is studied later.
  • Whenever one substance changes into another, one form of energy is converted into another.

Heat is usually released or absorbed

  • but the conversion can also involve light, electrical energy or other forms.
  • For example, chemical energy, a type of potential energy, is stored in the molecules of gasoline.

1 / 2Next ▶

Conservation of energy

Conservation of energy

  • When gasoline burns inside an engine cylinder, the rapidly expanding gaseous products push the piston,
  • producing mechanical energy,which is a type of kinetic energy.
  • The law of conservation of matter also applies in chemical changes: the total mass of matter does not change detectably.
  • In ordinary chemical reactions the energy changes are modest and the mass changes are too small to measure
  • so both conservation laws hold well.
  • In nuclear reactions the energy changes are much larger, roughly a million times greater, the mass changes can be measured,
  • and matter and energy convert into each other.
  • Nuclear reactions are treated in a later chapter.

◀ Previous, 2 / 2

5.1 Energy Basics · 5 / 14
5.1 Thermal energy, temperature and heat

Thermal energy, temperature and heat

Thermal energy, temperature and heat: The molecules in hot water move faster than the molecules in cold water, so hot water has the higher average kinetic energy.
Thermal energy, temperature and heat: The molecules in hot water move faster than the molecules in cold water, so hot water has the higher average kinetic energy.
  1. Thermal energy, temperature and heat3Thermal energy, temperature and heat4Thermal energy, temperature and heat
  2. Thermal energy, temperature and heat
  3. is the kinetic energy associated with the random motion of atoms and molecules. Temperature is a quantitative measure of how hot or cold a sample is.
  4. When the atoms and molecules of an object move or vibrate quickly, their average kinetic energy is high and the object feels hot.
  5. When they move slowly, their average kinetic energy is low and the object feels cold.
  6. If no chemical reaction or phase change such as melting or vaporizing occurs, adding thermal energy to a sample raises its temperature.
  7. If no chemical reaction or phase change such as condensation or freezing occurs, removing thermal energy lowers its temperature.
  8. 1 / 4Next ▶
  9. The molecules in hot water move faster than the molecules in cold water, so hot water has the higher average kinetic energy.
  10. Image: OpenStax, Chemistry 2e, CC BY 4.0.
  11. Thermal energy, temperature and heat
  12. ⤢ Enlarge
  13. Most substances expand when their temperature rises and contract when it falls.
  14. Thermometers use this property.
  15. 3In an alcohol or mercury thermometer, the liquid expands more than the glass tube that holds it,
  16. so the liquid column rises as the temperature increases.
  17. A bimetallic thermometer uses a strip of two metals, such as brass and steel, bonded together.
  18. 5Brass expands more than steel when heated
  19. so the strip coils or uncoils, and a pointer on a calibrated scale shows the temperature.
  20. ◀ Previous, 2 / 4Next ▶
  21. A liquid thermometer relies on the liquid expanding more than its glass tube, while a bimetallic thermometer coils or uncoils because two metals expand by different amounts.
  22. Image: OpenStax, Chemistry 2e, CC BY 4.0.
  23. Thermal energy, temperature and heat
  24. ⤢ Enlarge
  25. Thermal energy, temperature and heat
  26. (q) is the transfer of thermal energy between two bodies at different temperatures.
  27. The term heat flow is also used, although it is redundant.
  28. Heat flow increases the thermal energy of one body and decreases the thermal energy of the other.
  29. Suppose a hot substance H, whose molecules have a higher average kinetic energy, is placed in contact with a cold substance L.
  30. Thermal energy flows spontaneously from H to L.
  31. The temperature and average kinetic energy of H fall
  32. while those of L rise.
  33. ◀ Previous, 3 / 4Next ▶
  34. Substance H is hot and L is cold; when they touch, collisions move thermal energy from H to L until both reach the same temperature.
  35. Image: OpenStax, Chemistry 2e, CC BY 4.0.
  36. Thermal energy, temperature and heat
  37. ⤢ Enlarge
  38. Thermal energy, temperature and heat
  39. Heat flow continues until both substances reach the same temperature, a condition called thermal equilibrium.
  40. ◀ Previous, 4 / 4
Thermal energy, temperature and heat: A liquid thermometer relies on the liquid expanding more than its glass tube, while a bimetallic thermometer coils or uncoils because two metals expand by different amounts.
Thermal energy, temperature and heat: A liquid thermometer relies on the liquid expanding more than its glass tube, while a bimetallic thermometer coils or uncoils because two metals expand by different amounts.
◀ Previous2 / 4Next ▶→A liquid thermometer relies on the liquid expanding more than its glass tube, while a bimetallic thermometer coils or uncoils because two metals expand by different amounts.
Thermal energy, temperature and heat: Substance H is hot and L is cold; when they touch, collisions move thermal energy from H to L until both reach the same temperature.
Thermal energy, temperature and heat: Substance H is hot and L is cold; when they touch, collisions move thermal energy from H to L until both reach the same temperature.
◀ Previous3 / 4Next ▶→Substance H is hot and L is cold; when they touch, collisions move thermal energy from H to L until both reach the same temperature.
5.1 Energy Basics · 6 / 14
5.1 Exothermic and endothermic processes

Exothermic and endothermic processes

Exothermic and endothermic processes: A cutting torch releases heat through an exothermic combustion, while an instant cold pack absorbs heat through an endothermic dissolving process.
Exothermic and endothermic processes: A cutting torch releases heat through an exothermic combustion, while an instant cold pack absorbs heat through an endothermic dissolving process.
Exothermic and endothermic processes2→Exothermic and endothermic processes

Exothermic and endothermic processes

Exothermic and endothermic processes

  • Matter undergoing chemical reactions or physical changes can release or absorb heat.
  • A process that releases heat is called an exothermic process.
  • The combustion in an oxyacetylene torch is exothermic the energy released heats and melts the metal being cut,
  • and it also gives off light,which is seen as the flame.
  • A process that absorbs heat is called an endothermic process.
  • An instant cold pack used for muscle strains is an example.
  • When its water and a salt such as ammonium nitrate are brought together, the process absorbs heat from the surroundings
  • which is felt as cold.

1 / 2Next ▶

  • A cutting torch releases heat through an exothermic combustion, while an instant cold pack absorbs heat through an endothermic dissolving process.
  • Image: OpenStax, Chemistry 2e, CC BY 4.0.

Exothermic and endothermic processes

⤢ Enlarge

◀ Previous, 2 / 2

5.1 Energy Basics · 7 / 14
5.1 Units of energy

Units of energy

  1. Units of energy
  2. Units of energy
  3. Energy was historically measured in calories.
  4. One calorie (cal) is the energy needed to raise the temperature of one gram of water by 1 °C (1 K).
  5. 3This value depends slightly on atmospheric pressure and the starting temperature
  6. but the calorie is still often used.
  7. The Calorie, written with a capital C, is the large calorie used for food energy, and it equals one kilocalorie.
  8. The SI unit of heat, work and energy is the joule (J), defined as the energy used when a force of 1 newton moves an object through 1 meter.
  9. 6One joule equals 1 kg·m2/s2
  10. which is also called 1 newton-meter.
  11. 1 / 2Next ▶
  12. Units of energy
  13. A kilojoule (kJ) is 1000 joules.
  14. For a standard definition, 1 calorie is set equal to exactly 4.184 joules.
  15. ◀ Previous, 2 / 2
5.1 Energy Basics · 8 / 14
5.1 Heat capacity and specific heat

Heat capacity and specific heat

Heat capacity and specific heat: The larger frying pan has the greater heat capacity because it has more mass, but both pans have the same specific heat because they are made of the same material.
Heat capacity and specific heat: The larger frying pan has the greater heat capacity because it has more mass, but both pans have the same specific heat because they are made of the same material.
  1. Heat capacity and specific heat3Heat capacity and specific heat
  2. Heat capacity and specific heat
  3. Heat capacity and specific heat
  4. The heat capacity (C) of a body of matter is the quantity of heat (q) it absorbs or releases when its temperature changes by 1 °C (or equivalently 1 K).
  5. It is written as C = q / ΔT
  6. where q is in joules and ΔT is in °C or Kso heat capacity has the unit J/°C.
  7. Heat capacity depends on both the type and the amount of the substance,
  8. its value is proportional to the amount of substance.
  9. Consider two cast iron frying pans made of the same material.
  10. The small pan needs 18,140 J to raise its temperature by 50.0 °C
  11. so its heat capacity is 18,140 J ÷ 50.0 °C = 362.8 J/°C, or about 363 J/°C.
  12. The large pan needs 90,700 J for the same 50.0 °C rise
  13. so its heat capacity is about 1814 J/°C.
  14. 1 / 3Next ▶
  15. Heat capacity and specific heat
  16. 1The large pan has five times the heat capacity because its mass is five times greater,
  17. which means it contains five times as many atoms that must be made to vibrate faster.
  18. The specific heat capacity (c), usually just called specific heat, is the quantity of heat needed to raise the temperature of 1 gram of a substance by 1 °C (or 1 K).
  19. Its unit is J/g °C.
  20. 4Specific heat depends only on the kind of substance, not on the amount
  21. so it is an intensive property.
  22. 5Dividing the heat capacity by the mass gives the same value for both pans: the small pan has a mass of 808 g,
  23. so c = 18,140 J ÷ = 0.449 J/g °C,(808 g × 50.0 °C)and the large pan, with a mass of 4040 g, gives 90,700 J ÷ = 0.449 J/g °C.(4040 g × 50.0 °C)
  24. Both pans therefore have the specific heat of iron.
  25. ◀ Previous, 2 / 3Next ▶
  26. The larger frying pan has the greater heat capacity because it has more mass, but both pans have the same specific heat because they are made of the same material.
  27. Image: OpenStax, Chemistry 2e, CC BY 4.0.
  28. Heat capacity and specific heat
  29. ⤢ Enlarge
  30. Heat capacity and specific heat
  31. The molar heat capacity is the heat capacity per mole of a substance and has units of J/mol °C.
  32. Water has a high specific heat, about 4.2 J/g °C as a liquid and 2.09 J/g °C as ice
  33. while most metals have specific heats below 1 J/g °C.
  34. Specific heat changes a little with temperature,
  35. but the change is small enough that it is treated as constant over the temperature ranges in this chapter.
  36. A table of common substances lists specific heats of common substances at 25 °C and 1 bar.
  37. Helium gas has 5.193 J/g °C, liquid water 4.184 J/g °C, ethanol 2.376 J/g °C, water vapor 1.864 J/g °C, nitrogen gas 1.040 J/g °C, air 1.007 J/g °C, oxygen gas 0.918 J/g °C, aluminum 0.897 J/g °C, carbon dioxide gas 0.853 J/g °C, argon gas 0.522 J/g °C, iron 0.449 J/g °C, copper 0.385 J/g °C, lead 0.130 J/g °C, gold 0.129 J/g °C and silicon 0.712 J/g °C.
  38. Substances with a high specific heat need more energy to change temperature
  39. while metals with a low specific heat warm and cool quickly.
  40. ◀ Previous, 3 / 3
5.1 Energy Basics · 9 / 14
5.1 Calculating heat from specific heat

Calculating heat from specific heat

Calculating heat from specific heat

Calculating heat from specific heat

  1. If the mass of a substance and its specific heat are known
  2. the heat gained or lost can be found from the temperature change.

The equation is q = m × c × ΔT,

  • where q is the heat in joules, m is the mass in grams, c is the specific heat in J/g °C,and ΔT is the temperature change in °C, calculated as Tfinal − Tinitial.
  • If a substance gains thermal energy, its final temperature is higher, ΔT is positive and q is positive.
  • If it loses thermal energy, its final temperature is lower, ΔT is negative and q is negative.
  • The same relationship can be rearranged to find any one of the four quantities when the other three are known.
5.1 Energy Basics · 10 / 14
5.1 Chemistry in everyday life: solar thermal power plants

Chemistry in everyday life: solar thermal power plants

  1. Chemistry in everyday life: solar thermal power plants
  2. solar thermal power plants
  3. Sunlight reaching the earth contains thousands of times more energy than people currently capture.
  4. Solar thermal systems are one way to convert that energy into a usable form.
  5. Large solar thermal plants use different designs
  6. but all of them concentrate sunlight to heat a substance, and the stored heat is then turned into electricity.
  7. The Solana Generating Station in the Sonoran Desert of Arizona produces 280 megawatts of electrical power.
  8. Parabolic mirrors focus sunlight onto pipes filled with a heat transfer fluid (HTF).
  9. The HTF does two jobs.
  10. 5It turns water into steam,
  11. which spins turbines that produce electricity,and it melts and heats a mixture of salts that acts as a thermal energy storage system.
  12. After sunset, the molten salt mixture releases enough of its stored heat to keep producing steam for the turbines for about 6 hours.
  13. 1 / 2Next ▶
  14. solar thermal power plants
  15. solar thermal power plants
  16. Molten salts are used because they have high heat capacities and high thermal conductivities,
  17. which allow them to store and release a large amount of heat.
  18. ◀ Previous, 2 / 2
5.1 Energy Basics · 11 / 14
5.1 Worked examples

Worked examples

  1. Example 1: Heat absorbed by heated water3Example 2: Finding the specific heat of an unknown metal4Example 3: Heat capacity of a frying pan
  2. Heat absorbed by heated water
  3. Heat absorbed by heated water
  4. A flask holding 8.0 × 102 g of water is heated, and its temperature rises from 21 °C to 85 °C. How much heat does the water absorb?
  5. The heat depends on the specific heat of water, the mass of water and the temperature change. Water has c = 4.184 J/g °C. The temperature change is ΔT = 85 °C − 21 °C = 64 °C. The mass is 8.0 × 102 g = 800 g.
  6. q = m × c × ΔT = 800 g × 4.184 J/g °C × 64 °C = 2.14 × 105 J
  7. What the symbols mean:
  8. E, Q or q = energy transferred (J) · m = mass (kg
  9. g in chemistry calorimetry) · c = specific heat capacity (J kg
  10. −1
  11. 1 / 4Next ▶
  12. Heat absorbed by heated water
  13. °C
  14. water 4.18 J g
  15. ) · ΔT or Δθ = temperature change (°C or K)
  16. 4The temperature rose
  17. so the water absorbed heat and q is positive.
  18. How much heat, in joules, must be added to a 502 g iron skillet to raise its temperature from 25 °C to 250 °C? The specific heat of iron is 0.449 J/g °C.
  19. ΔT = 250 °C − 25 °C = 225 °C
  20. so q = 502 g × 0.449 J/g °C × 225 °C = 5.07 × 104 J.
  21. ◀ Previous, 2 / 4Next ▶
  22. Finding the specific heat of an unknown metal
  23. Finding the specific heat of an unknown metal
  24. A piece of unknown metal weighs 348 g. When it absorbs 6.64 kJ of heat, its temperature rises from 22.4 °C to 43.6 °C. What is its specific heat, and what might the metal be?
  25. Rearrange q = m × c × ΔT to give c = q ÷ (m × ΔT). The heat is 6.64 kJ = 6640 J, and ΔT = 43.6 °C − 22.4 °C = 21.2 °C.
  26. c = 6640 J ÷ (348 g × 21.2 °C) = 6640 ÷ 7377.6 = 0.900 J/g °C
  27. This value is closest to the specific heat of aluminum (0.897 J/g °C) in the table of common substances
  28. so the metal may be aluminum.
  29. A piece of unknown metal weighs 217 g. When it absorbs 1.43 kJ of heat, its temperature rises from 24.5 °C to 39.1 °C. Find its specific heat and predict its identity.
  30. ΔT = 14.6 °C
  31. so c = 1430 J ÷ (217 g × 14.6 °C) = 0.451 J/g °C. The metal is likely iron (0.449 J/g °C).
  32. ◀ Previous, 3 / 4Next ▶
  33. Heat capacity of a frying pan
  34. Heat capacity of a frying pan
  35. The small cast iron frying pan absorbs 18,140 J when its temperature rises by 50.0 °C. Find its heat capacity and its specific heat, given a mass of 808 g.
  36. Heat capacity C = q ÷ ΔT = 18,140 J ÷ 50.0 °C = 362.8 J/°C. Specific heat c = C ÷ m = 362.8 J/°C ÷ 808 g = 0.449 J/g °C.
  37. ◀ Previous, 4 / 4
5.1 Energy Basics · 12 / 14
5.1 Key terms

Key terms

  • Key terms
Term Meaning
Energy The capacity to supply heat or to do work.
Work (w) The process of causing matter to move against an opposing force.
Potential energy
  • Energy an object has because of its position
  • composition or condition
Kinetic energy Energy an object has because of its motion.
Law of conservation of energy
  • Energy can be neither created nor destroyed in a chemical or physical change
  • only changed in form
Thermal energy Kinetic energy associated with the random motion of atoms and molecules.
Temperature
  • A quantitative measure of how hot or cold a sample is
  • related to the average kinetic energy of its particles
Heat (q) Transfer of thermal energy between two bodies at different temperatures.
Thermal equilibrium The state reached when two bodies in contact have the same temperature and so the same average kinetic energy.
Exothermic process A change that releases heat to its surroundings.
Endothermic process A change that absorbs heat from its surroundings.
Calorie (cal)
  • The energy needed to raise the temperature of 1 gram of water by 1 °C
  • 1 cal = 4.184 J
Calorie (Cal)
  • The large food calorie
  • equal to 1 kilocalorie
Joule (J)
  • The SI unit of heat
  • work and energy
  • 1 J = 1 kg·m2/s2
Heat capacity (C)
  • The heat absorbed or released per 1 °C (or 1 K) temperature change of a body
  • depends on the amount of substance
Specific heat capacity (c)
  • The heat needed to raise the temperature of 1 gram of a substance by 1 °C
  • depends only on the substance
Molar heat capacity
  • The heat capacity per mole of a substance
  • in J/mol °C
Extensive property
  • A property whose value depends on the amount of matter
  • such as heat capacity
Intensive property
  • A property whose value does not depend on the amount of matter
  • such as specific heat
5.1 Energy Basics · 13 / 14
5.1 Avoid these mistakes

Avoid these mistakes

Avoid these mistakes2→Avoid these mistakes3Avoid these mistakes

Avoid these mistakes

Avoid this

Confusing heat with temperature.Avoid this

  • Temperature measures the average kinetic energy of particles,Avoid this
  • while heat is the transfer of thermal energy caused by a temperature difference.Avoid this

Avoid this

  1. Using the mass of the sample when a specific heat is asked for
  2. or the reverse.Avoid this

1 / 3Next ▶

Avoid these mistakes

  1. Specific heat is per gram
  2. so heat capacity must be divided by mass to obtain it.Avoid this

Avoid this

  • Calculating ΔT as initial minus final temperature.
  • ΔT is always final minus initial, so a cooling sample gives a negative q.Avoid this

Avoid this

  1. Forgetting to convert kilojoules to joules before using q = m × c × ΔT with c in J/g °C
  2. as in Example 2.Avoid this

Avoid this

◀ Previous, 2 / 3Next ▶

Avoid these mistakes

  • Thinking that an exothermic process must feel hot or that an endothermic process must feel cold.Avoid this
  • These terms describe the direction of heat flow, not the sensation; the sign of q shows the direction.Avoid this

Avoid this

  • Assuming the energy of a chemical change disappears when it is not seen.Avoid this
  • The law of conservation of energy requires that energy change form, not vanish.Avoid this

◀ Previous, 3 / 3

5.1 Energy Basics · 14 / 14
Accepted payment methods