Curriculum
Login

Curriculum

Chemistry 2e

Unit 18

0/26Dr Dabour Hub Science Education
Text lesson

12.7 Catalysis

Chemistry 2e · 12.7

Catalysis

12.7 Catalysts and reaction pathways

Catalysts and reaction pathways

Catalysts and reaction pathways: Energy profiles for an endothermic reaction with and without a catalyst. The catalyzed route has two steps and a lower peak energy.
Catalysts and reaction pathways: Energy profiles for an endothermic reaction with and without a catalyst. The catalyzed route has two steps and a lower peak energy.
  1. Catalysts and reaction pathways3Catalysts and reaction pathways4Catalysts and reaction pathways
  2. Catalysts and reaction pathways
  3. Catalysts and reaction pathways
  4. A catalyst is a substance that increases the rate of a reaction without being consumed in the reaction.
  5. Catalysts work through the reaction mechanism, the sequence of elementary steps that make up the overall reaction.
  6. The mechanisms covered in the previous section explain how a catalyst does this.
  7. The activation energy, Eₐ, is the energy needed to reach the transition state, the highest-energy arrangement along the reaction path.
  8. 1 / 4Next ▶
  9. Catalysts and reaction pathways
  10. It is found by subtracting the energy of the reactants from the energy of the transition state, and it is measured in kJ.
  11. The diagram below compares one reaction with and without a catalyst.
  12. Both curves start and end at the same energies because they describe the same overall reaction.
  13. 5Here the products are higher in energy than the reactants
  14. so the reaction is endothermic and ΔH is positive.
  15. 6The uncatalyzed reaction (red curve) has one transition state
  16. so it is a one-step mechanism.
  17. ◀ Previous, 2 / 4Next ▶
  18. Catalysts and reaction pathways
  19. Catalysts and reaction pathways
  20. The catalyzed reaction (blue curve) has two transition states with an intermediate in the valley between them,
  21. so it is a two-step mechanism.
  22. The key point is that the catalyzed route has a lower activation energy.
  23. The catalyst does not change the energies of the reactants or products, and it does not change ΔH.
  24. It provides a different path whose rate-determining step, the slowest step, has a smaller activation energy.
  25. ◀ Previous, 3 / 4Next ▶
  26. Energy profiles for an endothermic reaction with and without a catalyst.
  27. The catalyzed route has two steps and a lower peak energy.
  28. Image: OpenStax, Chemistry 2e, CC BY 4.0.
  29. Catalysts and reaction pathways
  30. ⤢ Enlarge
  31. Catalysts and reaction pathways
  32. The catalyzed mechanism does not have to contain fewer steps than the uncatalyzed one.
  33. It only needs a path in which the rate-determining step is faster.
  34. ◀ Previous, 4 / 4
12.7 Catalysis · 1 / 10
12.7 Homogeneous catalysts

Homogeneous catalysts

  1. Homogeneous catalysts
  2. Homogeneous catalysts
  3. A homogeneous catalyst is present in the same phase as the reactants.
  4. It reacts with a reactant to form an intermediate.
  5. The intermediate then decomposes or reacts with another reactant in one or more steps
  6. which regenerates the original catalyst and forms the product.
  7. The ozone layer in the upper atmosphere is an important example.
  8. 3O2 → 2O3.
  9. Ozone protects Earth by absorbing ultraviolet radiation.
  10. Ozone is unstable and breaks down to diatomic oxygen by the reverse reaction, with overall equation 2O3 → 3O2.
  11. O3 → O2 + O, followed by O + O3 → 2O2.
  12. 1 / 2Next ▶
  13. Homogeneous catalysts
  14. Both steps add up to the overall reaction.
  15. Several substances can catalyze the decomposition of ozone.
  16. NO + O3 → NO2 + O2
  17. then NO2 → NO + Othen O + O3 → 2O2.
  18. The sum of the three steps is the same overall reaction as the uncatalyzed mechanism.
  19. 5NO is a reactant in the first step and a product in a later step
  20. so it takes part in the reaction but is not used up overall.
  21. This is the defining trait of a catalyst.
  22. ◀ Previous, 2 / 2
12.7 Catalysis · 2 / 10
12.7 Portrait of a Chemist: Mario J. Molina

Portrait of a Chemist: Mario J. Molina

Portrait of a Chemist: Mario J. Molina: Mario Molina, who shared the 1995 Nobel Prize, beside an image of the Antarctic ozone hole.
Portrait of a Chemist: Mario J. Molina: Mario Molina, who shared the 1995 Nobel Prize, beside an image of the Antarctic ozone hole.
  1. Portrait of a Chemist: Mario J. Molina
  2. Mario Molina, who shared the 1995 Nobel Prize, beside an image of the Antarctic ozone hole.
  3. Image: OpenStax, Chemistry 2e, CC BY 4.0.
  4. Mario J. Molina
  5. ⤢ Enlarge
  6. Mario J. Molina
  7. The 1995 Nobel Prize in Chemistry was shared by Paul J.
  8. Crutzen, Mario J.
  9. Molina and F.
  10. Sherwood Rowland for their work on the formation and decomposition of ozone.
  11. Molina, a Mexican citizen, did most of his research at the Massachusetts Institute of Technology (MIT).
  12. In 1974 Molina and Rowland published a paper in the journal Nature warning that chlorofluorocarbon gases threaten the ozone layer.
  13. The ozone layer absorbs ultraviolet light and protects Earth from solar radiation.
  14. As chemical reactions reduce ozone, a hole forms above Antarctica and more ultraviolet radiation reaches the surface.
  15. This increase is strongly linked to skin cancer.
  16. Their work helped lead to the Montreal Protocol, a treaty signed in 1987 that began phasing out production of chemicals that destroy ozone.
  17. 1 / 2Next ▶
  18. Mario J. Molina
  19. Molina and Rowland showed that chlorine atoms from human-made chemicals catalyze ozone destruction in a way similar to NO.
  20. Chlorine atoms form when chlorocarbons or chlorofluorocarbons, once widely used as refrigerants and propellants, are broken down by ultraviolet light or react with hydroxyl radicals.
  21. For example, methyl chloride, CH3Cl, can release chlorine atoms when it is decomposed by ultraviolet light.
  22. Cl + O3 → ClO + O2, followed by ClO + O → Cl + O2.
  23. 5The chlorine atom is regenerated at the end of each cycle
  24. so a single chlorine atom can destroy thousands of ozone molecules.
  25. 6Most atmospheric chlorine, however, exists in the forms Cl2 and ClONO2
  26. which do not catalyze ozone loss.
  27. ◀ Previous, 2 / 2
12.7 Catalysis · 3 / 10
12.7 How Sciences Interconnect: Glucose-6-phosphate dehydrogenase deficiency

How Sciences Interconnect: Glucose-6-phosphate dehydrogenase deficiency

How Sciences Interconnect: Glucose-6-phosphate dehydrogenase deficiency: Glucose-6-phosphate dehydrogenase, the enzyme that limits how fast cells can produce NADPH.
How Sciences Interconnect: Glucose-6-phosphate dehydrogenase deficiency: Glucose-6-phosphate dehydrogenase, the enzyme that limits how fast cells can produce NADPH.
  • How Sciences Interconnect: Glucose-6-phosphate dehydrogenase2 How Sciences Interconnect: Glucose-6-phosphate dehydrogenase
  • How Sciences Interconnect Glucose-6-phosphate dehydrogenase deficiency
  • How Sciences Interconnect Glucose-6-phosphate dehydrogenase deficiency
  • Enzymes in the human body act as catalysts for important reactions in cellular metabolism.
  • A shortage of a particular enzyme can therefore cause a life-threatening disease.
  • Glucose-6-phosphate dehydrogenase (G6PD) deficiency is a genetic condition in which there is too little of this enzyme,
  • and it is the most common enzyme deficiency in humans.
  • The enzyme is rate-limiting for the metabolic pathway that supplies NADPH to cells.

1 / 2Next ▶

  • Glucose-6-phosphate dehydrogenase, the enzyme that limits how fast cells can produce NADPH.
  • Image: OpenStax, Chemistry 2e, CC BY 4.0.
  • How Sciences Interconnect Glucose-6-phosphate dehydrogenase deficiency

⤢ Enlarge

  • How Sciences Interconnect Glucose-6-phosphate dehydrogenase deficiency
  • When this pathway is disrupted, red blood cells have less reduced glutathione, an antioxidant that protects them from oxidative damage.
  • Once all the glutathione is used up, enzymes and other proteins such as hemoglobin are open to damage.

Hemoglobin can be broken down to bilirubin

  • which causes jaundice that can become severe.
  • People with G6PD deficiency must avoid certain foods and medicines that can damage their glutathione-poor red blood cells.

◀ Previous, 2 / 2

12.7 Catalysis · 4 / 10
12.7 Heterogeneous catalysts

Heterogeneous catalysts

Heterogeneous catalysts: Four steps of the nickel-catalyzed reaction, from adsorption of hydrogen and ethylene to desorption of ethane.
Heterogeneous catalysts: Four steps of the nickel-catalyzed reaction, from adsorption of hydrogen and ethylene to desorption of ethane.
  1. Heterogeneous catalysts3Heterogeneous catalysts4Heterogeneous catalysts
  2. Heterogeneous catalysts
  3. A heterogeneous catalyst is present in a different phase from the reactants, usually a solid.
  4. It works by providing an active surface on which the reaction can take place.
  5. In gas and liquid reactions, the reaction occurs on the surface of the catalyst rather than within the gas or liquid.
  6. Adsorption is the binding of molecules to a surface, and desorption is their release from it.
  7. Heterogeneous catalysis usually involves four processes:
  8. 1 / 4Next ▶
  9. Heterogeneous catalysts
  10. Adsorption of the reactant(s) onto the surface of the catalyst
  11. Activation of the adsorbed reactant(s)
  12. Reaction of the adsorbed reactant(s)
  13. ◀ Previous, 2 / 4Next ▶
  14. Heterogeneous catalysts
  15. Heterogeneous catalysts
  16. Desorption of the product(s) from the surface of the catalyst
  17. Nickel catalyzes the hydrogenation of polyunsaturated fats and oils
  18. which contain several carbon–carbon double bonds, into saturated fats and oils, which contain only single bonds.
  19. The figure below shows the steps for ethylene and hydrogen on a nickel surface.
  20. Hydrogen adsorbs and its H–H bonds break, forming Ni–H bonds.
  21. Ethylene adsorbs and its C–C π bond breaks, forming Ni–C bonds.
  22. The surface atoms diffuse and form new C–H bonds when they collide.
  23. ◀ Previous, 3 / 4Next ▶
  24. Four steps of the nickel-catalyzed reaction, from adsorption of hydrogen and ethylene to desorption of ethane.
  25. Image: OpenStax, Chemistry 2e, CC BY 4.0.
  26. Heterogeneous catalysts
  27. ⤢ Enlarge
  28. Finally, the ethane, C2H6, molecules desorb from the nickel surface.
  29. Heterogeneous catalysts are used in many important industrial processes, including the production of ammonia, nitric acid, sulfuric acid and methanol.
  30. ◀ Previous, 4 / 4
12.7 Catalysis · 5 / 10
12.7 Chemistry in Everyday Life: Automobile catalytic converters

Chemistry in Everyday Life: Automobile catalytic converters

Chemistry in Everyday Life: Automobile catalytic converters: A catalytic converter in the exhaust system of a gasoline-powered car, which cuts pollutants in emissions.
Chemistry in Everyday Life: Automobile catalytic converters: A catalytic converter in the exhaust system of a gasoline-powered car, which cuts pollutants in emissions.
  • A catalytic converter in the exhaust system of a gasoline-powered car, which cuts pollutants in emissions.
  • Image: OpenStax, Chemistry 2e, CC BY 4.0.
  • Chemistry in Everyday Life Automobile catalytic converters

⤢ Enlarge

  • Chemistry in Everyday Life Automobile catalytic converters
  • Catalytic converters were developed to reduce the toxic emissions produced when gasoline burns in internal combustion engines.
  • A carefully chosen mix of catalytic metals makes all carbon-containing compounds burn completely to carbon dioxide while also reducing nitrogen oxide emissions.
  • This is impressive because one step adds oxygen to the pollutants and another step removes oxygen from them.
  • Most modern three-way converters have a surface coated with a platinum–rhodium catalyst.
  • It converts nitric oxide into nitrogen and oxygen, 2NO → N2 + O2.
  • It also converts carbon monoxide and hydrocarbons into carbon dioxide and water vapor, for example 2CO + O2 → 2CO2,
  • and for octane 2C8H18 + 25O2 → 16CO2 + 18H2O.
  • To work efficiently, most catalytic converters are preheated by an electric heater.
  • This keeps the metals in the catalyst fully active before the exhaust is hot enough to maintain the reaction temperature.
  • Link to learning an online chemistry resource from the University of California at Davis explains in detail how catalytic converters work. In short, the catalyst surface holds exhaust molecules so that they can react more easily and at lower temperatures.
12.7 Catalysis · 6 / 10
12.7 How Sciences Interconnect: Enzyme structure and function

How Sciences Interconnect: Enzyme structure and function

How Sciences Interconnect: Enzyme structure and function: The lock-and-key model, with a fixed active site that matches the substrate, compared with the induced-fit model, with a flexible active site.
How Sciences Interconnect: Enzyme structure and function: The lock-and-key model, with a fixed active site that matches the substrate, compared with the induced-fit model, with a flexible active site.
  • How Sciences Interconnect: Enzyme structure and function2 How Sciences Interconnect: Enzyme structure and function
  • How Sciences Interconnect Enzyme structure and function
  • How Sciences Interconnect Enzyme structure and function
  • The study of enzymes connects biology and chemistry.
  • Enzymes are usually proteins (polypeptides) that control the rate of chemical reactions between biologically important compounds, especially in cellular metabolism.
  • Enzymes are grouped into classes according to the type of reaction they catalyze.
  • Classes of enzymes and their functions:
  • An enzyme has an active site, a part of the molecule whose shape allows it to bond to a specific substrate
  • which is the reactant molecule.
  • The enzyme and substrate form an enzyme–substrate complex
  • which is a reaction intermediate.
  • Two models explain how the active site works.
  • The lock-and-key hypothesis says that the shapes of the active site and the substrate are complementary, fitting together like a key in a lock.
Class Function
Oxidoreductases Redox reactions
Transferases Transfer of functional groups
Hydrolases Hydrolysis reactions
Lyases Removal of a group to form double bonds
Isomerases Isomerization
Ligases Bond formation coupled with ATP hydrolysis
  1. 1 / 2Next ▶
  2. The lock-and-key model, with a fixed active site that matches the substrate, compared with the induced-fit model, with a flexible active site.
  3. Image: OpenStax, Chemistry 2e, CC BY 4.0.
  4. Enzyme structure and function
  5. ⤢ Enlarge
  6. The induced-fit hypothesis says that the enzyme is flexible and changes shape to accommodate the substrate.
  7. The active site is not completely flexible, however.
  8. Both models explain why an enzyme binds only specific substrates and usually catalyzes only one particular reaction.
  9. the Royal Society of Chemistry provides an introduction to enzymes for students and teachers. It covers the same ideas of active sites, substrate binding and the way enzymes speed up reactions.
  10. ◀ Previous, 2 / 2
12.7 Catalysis · 7 / 10
12.7 Worked examples

Worked examples

Worked examples: Two reaction diagrams of the same reaction, one without a catalyst (a) and one with a catalyst (b).
Worked examples: Two reaction diagrams of the same reaction, one without a catalyst (a) and one with a catalyst (b).
  1. Practice: a catalyzed two-step mechanism3Practice: a catalyzed two-step mechanism
  2. Comparing activation energies on reaction diagrams
  3. Two reaction diagrams represent the same reaction, one without a catalyst and one with a catalyst.
  4. Estimate the activation energy of each process and identify the catalyzed one.
  5. Activation energy is the transition-state energy minus the reactant energy.
  6. 4In diagram (a), the reactants are at about 6 kJ and the peak is at about 32 kJ
  7. so Eₐ ≈ 32 kJ − 6 kJ = 26 kJ.
  8. 5In diagram (b), the reactants are at the same energy and the peak is at about 20 kJ
  9. so Eₐ ≈ 20 kJ − 6 kJ = 14 kJ.
  10. 6Diagram (b) has the lower activation energy
  11. so it represents the catalyzed reaction.
  12. 1 / 3Next ▶
  13. Two reaction diagrams of the same reaction, one without a catalyst (a) and one with a catalyst (b).
  14. Image: OpenStax, Chemistry 2e, CC BY 4.0.
  15. a catalyzed two-step mechanism
  16. ⤢ Enlarge
  17. a catalyzed two-step mechanism
  18. reaction diagrams (a) and (b) show a process with and without a catalyst. Both reactions involve a two-step mechanism with a rate-determining first step. Compute the activation energy of the first step of each mechanism and identify the catalyzed one. How do the second steps of the two mechanisms compare?
  19. ◀ Previous, 2 / 3Next ▶
  20. Two energy diagrams for the practice question, with a first step peak at about 90 kJ in (a) and about 80 kJ in (b).
  21. Image: OpenStax, Chemistry 2e, CC BY 4.0.
  22. a catalyzed two-step mechanism
  23. ⤢ Enlarge
  24. For the first step, Eₐ = 90 kJ − 10 kJ = 80 kJ in diagram (a) and Eₐ = 80 kJ − 10 kJ = 70 kJ in diagram (b).
  25. Diagram (b) therefore depicts the catalyzed reaction.
  26. 3The second steps of both mechanisms have the same activation energy, 75 kJ − 55 kJ = 20 kJ
  27. because the catalyst changes only the first step.
  28. ◀ Previous, 3 / 3
Worked examples: Two energy diagrams for the practice question, with a first step peak at about 90 kJ in (a) and about 80 kJ in (b).
Worked examples: Two energy diagrams for the practice question, with a first step peak at about 90 kJ in (a) and about 80 kJ in (b).
◀ Previous2 / 3Next ▶→Two energy diagrams for the practice question, with a first step peak at about 90 kJ in (a) and about 80 kJ in (b).
12.7 Catalysis · 8 / 10
12.7 Key terms

Key terms

  • Key terms
Term Meaning
Catalyst A substance that increases the rate of a reaction and is not consumed by it.
Reaction mechanism
  • The sequence of elementary steps by
  • an overall reaction takes place
Activation energy (Eₐ)
  • The energy needed to reach the transition state
  • measured in kJ
Transition state The highest-energy arrangement of atoms along a reaction path.
Intermediate A species formed in one step of a mechanism and used up in a later step.
Rate-determining step
  • The slowest step in a mechanism
  • which controls the overall reaction rate
Homogeneous catalyst A catalyst that is in the same phase as the reactants.
Heterogeneous catalyst
  • A catalyst that is in a different phase from the reactants
  • usually a solid that provides a surface
Adsorption The binding of molecules to the surface of a solid.
Desorption The release of molecules from a solid surface.
Catalytic converter A device in car exhaust systems that uses catalysts to reduce harmful emissions.
Enzyme
  • A protein
  • usually
  • that catalyzes a specific reaction in a living system
Active site The part of an enzyme whose shape allows it to bind a specific substrate.
Substrate The reactant molecule that an enzyme binds.
Enzyme–substrate complex The temporary species formed when an enzyme binds its substrate.
Lock-and-key hypothesis
  • The model in
  • the active site and substrate have complementary shapes that fit exactly
Induced-fit hypothesis
  • The model in
  • a flexible enzyme changes shape to accommodate its substrate
12.7 Catalysis · 9 / 10
12.7 Avoid these mistakes

Avoid these mistakes

Avoid these mistakes2→Avoid these mistakes3Avoid these mistakes

Avoid these mistakes

Avoid this

  • Thinking the catalyst is used up.
  • It appears as a reactant in one step and is regenerated in a later step, so it is not consumed overall.Avoid this

Avoid this

  • Believing the catalyst changes the energy of the reactants or products or the value of ΔH.Avoid this
  • It only lowers the activation energy of the rate-determining step.Avoid this

Avoid this

1 / 3Next ▶

Avoid these mistakes

  • Assuming a catalyzed mechanism must have fewer steps.
  • It needs a faster rate-determining step, and it may have the same number of steps.Avoid this

Avoid this

  • Calculating activation energy from the product energy instead of the reactant energy.Avoid this

Avoid this

Mixing up homogeneous catalysts,Avoid this

  1. which are in the same phase as the reactants
  2. with heterogeneous catalysts,Avoid this

◀ Previous, 2 / 3Next ▶

Avoid these mistakes

  1. which are in a different phase
  2. usually solid.Avoid this

Avoid this

  1. Confusing adsorption
  2. the binding of molecules to a surface
  3. with absorption
  4. which means taking molecules into the bulk of a material.Avoid this

Avoid this

  • Assuming an enzyme can bind any substrate. An enzyme’s active site is specific to a particular substrate and reaction.Avoid this

◀ Previous, 3 / 3

12.7 Catalysis · 10 / 10
Accepted payment methods