Curriculum
Course: Chemistry 2e
Login

Curriculum

Chemistry 2e

Unit 9: Gases

0/23 Dr Dabour Hub Science Diagram and Course Material

Unit 10: Liquids and Solids

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 12: Kinetics

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 14: Acid-Base Equilibria

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 17: Electrochemistry

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 18: Representative Metals, Metalloids, and Nonmetals

0/52 Dr Dabour Hub Science Diagram and Course Material

Unit 19: Transition Metals and Coordination Chemistry

0/16 Dr Dabour Hub Science Diagram and Course Material

Unit 21: Nuclear Chemistry

0/28 Dr Dabour Hub Science Diagram and Course Material
Text lesson

3.2 Determining Empirical and Molecular Formulas

3.2 Determining Empirical and Molecular Formulas — CHEMISTRY notes: You will be able to calculate the percent composition of a compound, derive its empirical formula from masses or percentages, and find its molecular formula from its molar mass.

Learning objectives · Learning objectives
Learning objectives
By the end of this section, you will be able to:
Learning objectives
Compute the percent composition of a compound
Determine the empirical formula of a compound
Determine the molecular formula of a compound
Finding formulas from mass
1

Earlier, you saw how the mass of a substance relates to the number of moles it contains

so the mass of a sample can be used to find the number of moles, and the reverse. This section applies the same principles to a different problem: finding the formula of a substance whose formula is unknown, using experimental mass measurements.
2

Chemical formulas show the relative numbers of atoms, not masses. Any measured mass must therefore be converted into a number of moles of atoms before the formula can be worked out.
1Percent composition2Percent composition
Percent composition
Percent composition
The elemental makeup of a compound defines its chemical identity, and its formula is the most concise way to show that makeup.
When a compound’s formula is unknown, measuring the mass of each element is usually the first step.
From these masses, the percent composition can be calculated.
The percent composition is the percentage by mass of each element in the compound.
It is found by dividing the mass of each element by the total mass of the compound and multiplying by 100.
Consider a gaseous compound made only of carbon and hydrogen.
1 / 2Next ▶
Percent composition
Percent composition
If a 10.0 g sample of the gas contains 2.5 g of H and 7.5 g of C, the percent composition is 25% H and 75% C,

because 2.5 ÷ 10.0 × 100 = 25% and 7.5 ÷ 10.0 × 100 = 75%.
The percentages add up to 100%, as they must.
◀ Previous2 / 2
1Percent composition from a known formula2Percent composition from a known formula
Percent composition from a known formula
1

Percent composition is also useful for comparing how much of an element different compounds contain.
2

Common nitrogen-containing fertilizers are a good example.
3

Nitrogen is the active ingredient for crops

so the nitrogen mass percentage matters to anyone choosing between them.
4

When the formula of a compound is known, its percent composition can be calculated from the atomic masses of its elements and its formula mass.
5

For ammonia, NH3, one nitrogen atom weighs 14.01 amu and three hydrogen atoms weigh a total of 3 × 1.008 = 3.024 amu.
6

The formula mass is therefore 17.03 amu, and the nitrogen percentage is 14.01 ÷ 17.03 × 100 = 82.2%.
1 / 2Next ▶
Percent composition from a known formula
1

The same method gives about 35.0% N for ammonium nitrate, NH4NO3, and about 46.6% N for urea, CH4N2O.
2

The same approach works for a pair of molecules, a dozen molecules, or one mole of molecules.
3

One mole is the most convenient

because the molar masses of the elements and the compound can be used in place of atomic and formula masses.
4

Each element’s percentage equals the total molar mass of that element in one mole of the compound divided by the molar mass of the compound, multiplied by 100.
◀ Previous2 / 2
1Determining empirical formulas2Determining empirical formulas3Determining empirical formulas4Determining empirical formulas
Determining empirical formulas
Determining empirical formulas
Because the mass of each element is measured, it must be converted into moles of that element using its molar mass. Dividing each molar amount by the smallest molar amount gives the subscripts of a tentative empirical formula. The empirical formula is the formula that shows the smallest whole-number ratio of the atoms in the compound.
For example, a compound that contains 1.71 g of carbon and 0.287 g of hydrogen has 1.71 ÷ 12.01 = 0.142 mol C and 0.287 ÷ 1.008 = 0.285 mol H. Dividing both values by the smaller one, 0.142 mol, gives 1.00 for C and 2.00 for H. The empirical formula is therefore CH2.
Subscripts are conventionally whole numbers.
If dividing by the smallest molar amount still leaves a decimal subscript, every subscript is multiplied by the same integer,

which keeps the ratio of atoms the same.
For example, a compound containing 5.31 g of Cl and 8.40 g of O has 5.31 ÷ 35.45 = 0.150 mol Cl and 8.40 ÷ 16.00 = 0.525 mol O.
Dividing by 0.150 gives Cl1O3.50.
1 / 4Next ▶
Determining empirical formulas
1

Multiplying each subscript by two gives the empirical formula Cl2O7.
2

In summary, the empirical formula is derived from measured element masses in three steps:
◀ Previous2 / 4Next ▶
Determining empirical formulas
Determining empirical formulas
Derive the number of moles of each element from its mass.
Divide each element’s molar amount by the smallest molar amount to get the subscripts of a tentative empirical formula.
If necessary, multiply all subscripts by an integer so that the smallest whole-number ratio is obtained.
The flow chart below shows this procedure for a compound containing elements A and X. The mass of each element is divided by its molar mass, the resulting moles are divided by the lowest number of moles, and the ratio is converted into the lowest whole numbers.
◀ Previous3 / 4Next ▶
Flow chart of the steps: masses of A and X are divided by their molar masses, the moles are divided by the lowest number of moles, and the ratio is converted to whole numbers to give the empirical formula. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Determining empirical formulas
Determining empirical formulas: Flow chart of the steps: masses of A and X are divided by their molar masses, the moles are divided by the lowest number of moles, and the ratio is converted to whole numbers to give the empirical formula." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Determining empirical formulas
Online video clips give additional worked examples of deriving empirical formulas from masses. They repeat the same three steps shown above

so working through the examples in this lesson is enough preparation.
◀ Previous4 / 4
Deriving empirical formulas from percent composition
1

Sometimes the percent composition of a compound is known instead of the absolute masses of its elements.
2

In that case, the percentages are used to calculate the masses of the elements in any convenient sample mass.
3

Because a percentage is a number per hundred, the mass of each element in a 100 g sample is numerically equal to its mass percentage.
4

These masses are then converted into moles, and the usual procedure gives the empirical formula.
1Deriving molecular formulas2Deriving molecular formulas
Deriving molecular formulas
1

An empirical formula gives only the relative numbers of atoms of each element.
2

To find the actual number of atoms in one molecule of a covalent compound, the molecular mass or molar mass of the compound must also be known.
3

Molecular mass is often obtained from the mass spectrum of the compound.
4

Molar mass can be measured by several experimental methods that are introduced in later chapters.
5

The empirical formula mass is the sum of the average atomic masses of all the atoms shown in the empirical formula.
6

Dividing the molecular (or molar) mass by the empirical formula mass gives n, the number of empirical formula units per molecule.
1 / 2Next ▶
Deriving molecular formulas
Deriving molecular formulas
The molecular formula is then found by multiplying every subscript in the empirical formula by n.
For an empirical formula AxBy, the molecular formula is (AxBy)n.
For example, a covalent compound has the empirical formula CH2O.
The empirical formula mass is about 30 amu (12 amu for one C, 2 amu for two H, and 16 amu for one O).
If the molecular mass is 180 amu

then n = 180 ÷ 30 = 6.Each molecule contains six times the atoms in the empirical formula, so the molecular formula is C6H12O6.
The same method works with molar masses in g/mol

where one mole of empirical formula units and one mole of molecules are compared.
◀ Previous2 / 2
1Example 3.9: Calculation of percent composition2Example 3.9: Calculation of percent composition3Example 3.10: Percent composition from a molecular formula4Example 3.10: Percent composition from a molecular formula5Example 3.11: Empirical formula of hematite from element mas6Example 3.12: Empirical formula from percent composition7Example 3.13: Molecular formula of nicotine8Worked examples9Worked examples
Example 3.9: Calculation of percent composition
1

Problem: A 12.04 g sample of a liquid compound made of carbon, hydrogen and nitrogen contains 7.34 g C, 1.85 g H and 2.85 g N. What is the percent composition of this compound?
2

Solution: Divide the mass of each element by the mass of the whole sample and multiply by 100.
3

1
4

C: 7.34 ÷ 12.04 × 100 = 61.0%
5

2
6

H: 1.85 ÷ 12.04 × 100 = 15.4%
1 / 9Next ▶
Example 3.9: Calculation of percent composition
Example 3.9: Calculation of percent composition
3
N: 2.85 ÷ 12.04 × 100 = 23.7%
4
The compound is 61.0% C, 15.4% H and 23.7% N by mass.
Check Your Learning: A 24.81 g sample of a gaseous compound containing only carbon, oxygen and chlorine contains 3.01 g C, 4.00 g O and 17.81 g Cl. What is the percent composition? Answer: 12.1% C, 16.1% O and 71.79% Cl.
◀ Previous2 / 9Next ▶
Example 3.10: Percent composition from a molecular formula
Example 3.10: Percent composition from a molecular formula
Problem: Aspirin has the molecular formula C9H8O4. What is its percent composition?
Solution: Use one mole of aspirin, whose molar mass is 180.16 g/mol.
C: 9 × 12.01 g = 108.09 g, and 108.09 ÷ 180.16 × 100 = 60.00%
H: 8 × 1.008 g = 8.06 g, and 8.06 ÷ 180.16 × 100 = 4.48%
O: 4 × 16.00 g = 64.00 g, and 64.00 ÷ 180.16 × 100 = 35.52%
The percentages total 100.00%.
◀ Previous3 / 9Next ▶
Example 3.10: Percent composition from a molecular formula
Example 3.10: Percent composition from a molecular formula
Check Your Learning: To three significant digits, what is the mass percentage of iron in Fe2O3? Answer: 69.9% Fe. (2 × 55.85 ÷ 159.69 × 100 = 69.9%)
◀ Previous4 / 9Next ▶
Two polished hematite stones, a dark, glossy iron oxide mineral that is used in jewelry. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Example 3.11: Empirical formula of hematite from element masses
Worked examples: Two polished hematite stones, a dark, glossy iron oxide mineral that is used in jewelry." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

A sample of the black mineral hematite, an oxide of iron found in many iron ores, contains 34.97 g of iron and 15.03 g of oxygen. The hematite shown below is used in jewelry. What is its empirical formula?
2

Solution: First find the moles of each element.
3

Fe: 34.97 g ÷ 55.85 g/mol = 0.6262 mol
4

O: 15.03 g ÷ 16.00 g/mol = 0.9394 mol
5

Divide both by the smaller number of moles, 0.6262 mol, to get the iron-to-oxygen ratio: 1.000 mol Fe to 1.500 mol O, or Fe1O1.5. Multiply by two to get whole-number subscripts: Fe2O3. The empirical formula is Fe2O3.
6

Check Your Learning: What is the empirical formula of a compound if a sample contains 0.130 g of nitrogen and 0.370 g of oxygen? Answer: N2O5. (0.130 ÷ 14.01 = 0.00928 mol N

0.370 ÷ 16.00 = 0.02313 mol Othe ratio is 1 : 2.49which becomes 2 : 4.98, or 2 : 5.)
◀ Previous5 / 9Next ▶
Large copper fermentation tanks at an ethanol plant, where a carbon oxide gas is drawn off through the pipes at the top. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Example 3.12: Empirical formula from percent composition
Worked examples: Large copper fermentation tanks at an ethanol plant, where a carbon oxide gas is drawn off through the pipes at the top." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Example 3.12: Empirical formula from percent composition
Problem: Bacterial fermentation of grain to produce ethanol releases a gas with a percent composition of 27.29% C and 72.71% O. The large copper tanks shown below are used in this process, and the gas is drawn off through the pipes at their tops. What is the empirical formula of the gas?
Solution: Because percentages are per hundred, it is most convenient to use a 100 g sample. Then the mass of each element in grams equals its percentage: 27.29 g C and 72.71 g O.
C: 27.29 g ÷ 12.01 g/mol = 2.272 mol
O: 72.71 g ÷ 16.00 g/mol = 4.544 mol
Divide by the smaller value, 2.272 mol, to get C1O2.00. The ratio is one carbon to two oxygen atoms

so the empirical formula is CO2.
Check Your Learning: What is the empirical formula of a compound containing 40.0% C, 6.71% H and 53.28% O? Answer: CH2O. (3.331 mol C, 6.656 mol H and 3.330 mol O give the ratio 1 : 2 : 1.)
◀ Previous6 / 9Next ▶
Example 3.13: Molecular formula of nicotine
1

Problem: Nicotine is an alkaloid from the nightshade family of plants. It is mainly responsible for the addictive nature of cigarettes. It contains 74.02% C, 8.710% H and 17.27% N. If 40.57 g of nicotine contains 0.2500 mol of nicotine, what is its molecular formula?
2

Solution: First find the empirical formula. Use a 100 g sample

which gives:
◀ Previous7 / 9Next ▶
Worked examples
Worked examples
C: 74.02 g ÷ 12.01 g/mol = 6.163 mol
H: 8.710 g ÷ 1.008 g/mol = 8.641 mol
N: 17.27 g ÷ 14.01 g/mol = 1.233 mol
Dividing by the smallest value, 1.233 mol, gives C 5.00, H 7.01 and N 1.00. The empirical formula is C5H7N.
Next, find the empirical formula mass: 5 × 12.01 + 7 × 1.008 + 14.01 = 81.12 amu. The molar mass is 40.57 g ÷ 0.2500 mol = 162.3 g/mol. Then n = 162.3 ÷ 81.12 = 2.00. Multiply each subscript of the empirical formula by 2 to get the molecular formula, C10H14N2.
Check Your Learning: A compound has a percent composition of 49.47% C, 5.201% H, 28.84% N and 16.48% O, and a molecular mass of 194.2 amu.
◀ Previous8 / 9Next ▶
Worked examples
Worked examples
What is its molecular formula? Answer: C8H10N4O2.
(Per 100 g: 4.119 mol C, 5.160 mol H, 2.058 mol N and 1.030 mol O.
Dividing by 1.030 gives C4H5N2O, with an empirical formula mass of 97.10 amu.
Then n = 194.2 ÷ 97.10 = 2.00

so the molecular formula is C8H10N4O2.)
◀ Previous9 / 9
Key terms
Term Meaning
Percent composition The percentage by mass of each element in a compound, found by dividing each element’s mass by the total mass and multiplying by 100.
Empirical formula A chemical formula showing the smallest whole-number ratio of the atoms of each element in a compound.
Molecular formula A chemical formula showing the actual number of atoms of each element in one molecule of a compound.
Tentative empirical formula A formula whose subscripts come from dividing each molar amount by the smallest molar amount, before they are converted to whole numbers.
Empirical formula mass The sum of the average atomic masses of all atoms shown in an empirical formula.
Molecular mass The mass of one molecule in atomic mass units (amu), often determined from a mass spectrum.
Molar mass The mass of one mole of a substance, in grams per mole (g/mol).
n (empirical formula units per molecule) The whole number obtained by dividing the molecular or molar mass by the empirical formula mass.
Mole The amount of a substance that contains 6.022 × 1023 particles, such as atoms or molecules.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes
Avoid these mistakes
1Avoid this
Forming ratios directly from masses. Each mass must first be converted into moles using the molar mass of that element.Avoid this
2Avoid this
Dividing by the largest molar amount instead of the smallest. This gives subscripts that are too small and a wrong formula.Avoid this
3Avoid this
Rounding a decimal subscript such as 1.5 or 2.5 to a whole number.Avoid this
1 / 3Next ▶
Avoid these mistakes
Multiply every subscript by the same integer instead, for example by 2 to turn Fe1O1.5 into Fe2O3.Avoid this
4Avoid this
Treating the empirical formula as the molecular formula. The molar mass must be compared with the empirical formula mass to find n.Avoid this
5Avoid this
Rounding intermediate mole values too early. A ratio that should be 2.00 can appear as 1.9 or 2.1, which leads to the wrong formula.Avoid this
6Avoid this
◀ Previous2 / 3Next ▶
Avoid these mistakes
Dividing an element’s mass by the total mass of the wrong sample, or using a percentage where a mass is needed, when calculating percent composition.Avoid this
◀ Previous3 / 3
Accepted payment methods