Curriculum
Course: Chemistry 2e
Login

Curriculum

Chemistry 2e

Unit 9: Gases

0/23 Dr Dabour Hub Science Diagram and Course Material

Unit 10: Liquids and Solids

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 12: Kinetics

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 14: Acid-Base Equilibria

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 17: Electrochemistry

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 18: Representative Metals, Metalloids, and Nonmetals

0/52 Dr Dabour Hub Science Diagram and Course Material

Unit 19: Transition Metals and Coordination Chemistry

0/16 Dr Dabour Hub Science Diagram and Course Material

Unit 21: Nuclear Chemistry

0/28 Dr Dabour Hub Science Diagram and Course Material
Text lesson

1.6 Mathematical Treatment of Measurement Results

1.6 Mathematical Treatment of Measurement Results — CHEMISTRY notes: After this lesson you will be able to explain dimensional analysis (the factor-label method), use it to convert units and to solve calculations that combine two or more properties, and convert temperatures between the Celsius, Fahrenheit and kelvin scales.

1
Many quantities cannot be measured directly, or cannot be measured at all in practice.
2
Instead, they are calculated from other properties that can be measured, using a mathematical relationship that links them.
3
For example, the average speed of a sprinter is found by measuring the time the runner takes to get from the starting line to the finish line and the distance between those two lines, and then dividing the distance by the time.
Consider an Olympic-quality sprinter who runs 100 m in about 10 s.

The average speed is 100 m ÷ 10 s = 10 m/s.
Dividing the numbers (100 ÷ 10 = 10) gives the numerical part of the answer, and dividing the units (m ÷ s) gives the unit of the answer.

The trailing zeros are assumed to be significant digits in this example.
1
The same relationship can be rearranged to predict a different quantity.
2
If a person runs at the speed of 10 m/s, the time needed to cover 25 m comes from rearranging speed = distance ÷ time into time = distance ÷ speed.
3
Here the speed is in metres per second and the distance is in metres, so the time is 25 m ÷ (10 m/s).
4
The numbers
give 25 ÷ 10 = 2.5, and the units give m ÷ (m/s) = s, so the result is 2.5 s.
5
When a unit is divided by an identical unit (m/m), the result is 1, and the units are said to cancel.
1
These calculations are examples of dimensional analysis, also called the factor-label method.
2
Its basic idea is that units are subject to the same mathematical operations as the numbers attached to them.
3
This approach works for simple unit conversions and also for more complex, multi-step calculations that involve several different quantities.
1
A ratio of two equivalent quantities written with different units equals 1, so it can be used as a unit conversion factor.
2
For example, a length of 2.54 cm and a length of 1 in. are equivalent by definition.
3
The ratio 2.54 cm/1 in. therefore
equals 1, and so does its inverse, 1 in./2.54 cm.
4
Multiplying a quantity by a conversion factor changes its units without changing its actual size, provided the factor is chosen so that the unwanted unit cancels.
Consider a basketball player whose vertical jump is 34 inches.

To express this distance in centimeters, multiply by the factor that has inches in the denominator: 34 in. × (2.54 cm/1 in.) = 86.36 cm, which is 86 cm to two significant figures.
The numbers
multiply to give 86, and the units multiply to give in. × (cm/in.) = cm, because the inches cancel.
Several other commonly used conversion factors are listed in the table below.
Length
1 in. = 2.54 cm (exact); 1 m = 1.0936 yd; 1 km = 0.62137 mi; 1 mi = 1609.3 m
Volume
1 L = 1.0567 qt; 1 qt = 0.94635 L; 1 ft3 = 28.317 L; 1 tbsp = 14.787 mL
Mass
1 kg = 2.2046 lb; 1 lb = 453.59 g; 1 oz (avoirdupois) = 28.349 g; 1 oz (troy) = 31.103 g
1
The ounce and the pound in this table are strictly units of weight, which is a force equal to mass times gravitational acceleration.
2
The conversions
are still used to equate mass and weight in everyday calculations, because they assume a standard value of gravitational acceleration at the surface of the Earth.
The same approach handles problems with several steps.

Each factor must be oriented so that its unit labels cancel the unwanted units and leave the desired unit in the result.
A multi-step conversion
is simply a chain of such factors multiplied together.

Learning to set up these chains correctly is useful throughout chemistry, because most calculations in the subject combine measured quantities with known relationships.
1
Temperature is a measure of how hot or cold a substance is.
2
Most substances expand when their temperature rises and contract when it falls.
3
The liquid in a common glass thermometer changes its volume with temperature, and the height of the liquid surface on a printed scale is read as the temperature.
Temperature scales
are defined by reference temperatures, most often the freezing and boiling points of water at a specified atmospheric pressure.
On the Celsius scale, water freezes at 0 °C and boils at 100 °C, and the interval between these two points is divided into 100 equal degrees.
On the Fahrenheit scale, water freezes at 32 °F and boils at 212 °F, and the interval between these two points is divided into 180 equal degrees.
1
Most units of a given property
are directly proportional to one another, which means they follow the form y = mx, where m is the conversion factor.
2
For example, a length y in feet is equal to a length x in inches multiplied by a constant.
3
The Celsius and Fahrenheit scales, however, do not share a zero point.
4
Their relationship is therefore linear rather than proportional, and it has the form y = mx + b.
5
Converting a temperature from one of these scales to the other requires multiplication by a slope m and also an adjustment for the difference in zero points, b.
1
In this equation, the slope is m = (212 °F − 32 °F)/(100 °C − 0 °C) = 180 °F/100 °C = 1.8 °F/°C.
2
The intercept b is found from one known pair of equivalent temperatures.
3
Using the freezing point (0 °C, 32 °F) gives b = 32 °F.
4
The relationship between temperature in degrees Celsius, TC, and temperature in degrees Fahrenheit, TF, is therefore TF (°F) = 1.8 × TC (°C) + 32.
5
The boiling point confirms the result: 1.8 × 100 + 32 = 212.
The equation can be rearranged to convert from Fahrenheit to Celsius: TC (°C) = (TF (°F) − 32)/1.8, which is the same as 5/9 × (TF − 32).
1
The SI unit of temperature is the kelvin (K).
2
Unlike the Celsius and Fahrenheit scales, the kelvin scale is an absolute temperature scale.
3
Its zero, 0 K, is the lowest temperature that can theoretically be reached.
4
Because the scale is absolute,
the unit is written as K without a degree symbol.
5
In the early 19th century, scientists found that the volume of a gas would fall to zero at about −273.15 °C.
6
In 1848, the British physicist William Thomson, later Lord Kelvin, proposed an absolute temperature scale based on this idea.
7
The gas behavior behind this result is explained further in the chapter on gases.
1
On the kelvin scale, water freezes at 273.15 K and boils at 373.15 K.
2
The difference between these two reference points is 100 kelvins, the same as the difference on the Celsius scale, so the linear relationship between kelvins and degrees Celsius has a slope of 1 K/°C.
3
The conversion equations
are therefore TK (K) = TC (°C) + 273.15 and TC (°C) = TK (K) − 273.15.
4
The value 273.15 was determined by experiment, so it is not an exact number.
Three thermometers side by side compare the Fahrenheit, Celsius and kelvin scales. Water freezes at 32 °F, 0 °C and 273.15 K and boils at 212 °F, 100 °C and 373.15 K, while −40 °F and −40 °C are the same temperature. Image: OpenStax, Chemistry 2e, CC BY 4.0." loading= - Dr Khaled Dabour Academy
Three thermometers side by sideCelsiuskelvin scales. Water freezesOpenStax, CC BY 4.0
Although the kelvin scale
is the official SI temperature scale, degrees Celsius are commonly used in most scientific work and are the usual choice in everyday life in almost every country.

Only a few countries,
including the United States and its territories, still use the Fahrenheit scale for weather, medicine and cooking.
Example 1.8: Using a unit conversion factor
A competition frisbee has a mass of 125 g. Convert this mass to ounces using the relationship 1 oz = 28.349 g.
Solution
The factor must have grams in the denominator so that the grams cancel and ounces remain: 125 g × (1 oz/28.349 g) = 4.409 oz, or about 4.41 oz.
Check your learning
Convert a volume of 9.345 qt to liters.
Answer
9.345 qt × (1 L/1.0567 qt) = 8.844 L.
Example 1.9: Computing a density from measured values and known relationships
What is the density of common antifreeze in g/mL, if a 4.00 qt sample weighs 9.26 lb?
Solution
1
Density
is mass divided by volume, so the mass must be in grams and the volume in milliliters. Using 1 lb = 453.59 g, the mass is 9.26 lb × (453.59 g/1 lb) = 4200 g. The volume needs two steps. First, 4.00 qt × (1 L/1.0567 qt) = 3.785 L. Second, 3.785 L × (1000 mL/1 L) = 3785 mL. The density is therefore 4200 g ÷ 3785 mL = 1.11 g/mL.
2
The same result
can be found with a single chain of factors that cancels every unit except grams and milliliters.
Check your learning
What is the volume in liters of 1.000 oz, given 1 L = 1.0567 qt and 1 qt = 32 oz exactly?
Answer
1.000 oz × (1 qt/32 oz) × (1 L/1.0567 qt) = 2.957 × 10−2 L.
Example 1.10: Fuel economy and fuel cost from a trip
A 2014 sports car travels about 1250 km and uses 213 L of gasoline. (a) What is its average fuel economy in miles per gallon? (b) If gasoline costs $3.80 per gallon, what is the fuel cost of the trip?
Solution
1
(a) Convert the distance from kilometers to miles: 1250 km × (0.62137 mi/1 km) = 776.7 mi. Then convert the volume from liters to gallons, using 1 L = 1.0567 qt and 1 gal = 4 qt: 213 L × (1.0567 qt/1 L) × (1 gal/4 qt) = 56.27 gal. The fuel economy is 776.7 mi ÷ 56.27 gal = 13.8 mpg, or about 14 mpg.
2
(b) The volume in gallons is already known, so the cost is 56.27 gal × ($3.80/1 gal) = $213.8, or about $214.
Check your learning
A hybrid car uses 59.7 L of gasoline to drive 1300 km (two significant digits), from one city to another. (a) What is its fuel economy in miles per gallon? (b) If gasoline costs $3.90 per gallon, what is the fuel cost?
Answer
(a) 51 mpg; (b) $62.
Example 1.11: Converting a temperature from Celsius
Normal body temperature is commonly taken as 37.0 °C, although it varies with the time of day, the method of measurement and between individuals. What is this temperature on the kelvin scale and on the Fahrenheit scale?
Solution
1
On the kelvin scale, TK = 37.0 + 273.15 = 310.2 K.
2
On the Fahrenheit scale, TF = 1.8 × 37.0 + 32 = 98.6 °F.
Check your learning
Convert 80.92 °C to kelvin and degrees Fahrenheit.
Answer
354.07 K and 177.66 °F.
Example 1.12: Converting a temperature from Fahrenheit
Baking a ready-made pizza calls for an oven temperature of 450 °F. If the oven thermometer in Europe uses the Celsius scale, what is the setting in degrees Celsius? What is the temperature in kelvin?
Solution
1
Rearranging the equation gives TC = (450 − 32)/1.8 = 418/1.8 = 232.2 °C.
2
The kelvin temperature
is TK = 232.2 + 273.15 = 505.4 K, or about 505 K.
Check your learning
Convert 50 °F to degrees Celsius and kelvin.
Answer
10 °C and about 283 K (about 280 K to two significant figures).
Choosing a conversion factor whose units do not cancel the given unit
Write the unit chain out first and check that only the desired unit is left, for example 125 g × (1 oz/28.349 g), not 125 g × (28.349 g/1 oz).
Multiplying by a conversion factor when the calculation needs division, or the reverse
Dividing 125 g by 28.349 g/oz does not give ounces.
Treating the Celsius and Fahrenheit scales as directly proportional
The temperature 37 °C is not 37 × 1.8 = 66.6 °F; the offset of +32 must also be added.
Forgetting the +273.15 offset when converting to kelvins, or writing a degree symbol with the kelvin unit
The correct form is 310.2 K, not 310.2 °K.
Skipping a conversion step in a multi-step problem, such as converting quarts to liters before liters to milliliters, or mixing liters and milliliters in the same density calculation
Convert each quantity step by step into consistent units, such as quarts to liters to milliliters, before calculating.
Rounding intermediate results too early
Keep extra digits during each step and round only the final answer to the correct number of significant figures.
Accepted payment methods