Curriculum
Course: Chemistry 2e
Login

Curriculum

Chemistry 2e

Unit 9: Gases

0/23 Dr Dabour Hub Science Diagram and Course Material

Unit 10: Liquids and Solids

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 12: Kinetics

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 14: Acid-Base Equilibria

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 17: Electrochemistry

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 18: Representative Metals, Metalloids, and Nonmetals

0/52 Dr Dabour Hub Science Diagram and Course Material

Unit 19: Transition Metals and Coordination Chemistry

0/16 Dr Dabour Hub Science Diagram and Course Material

Unit 21: Nuclear Chemistry

0/28 Dr Dabour Hub Science Diagram and Course Material
Text lesson

17.7 Electrolysis

17.7 Electrolysis — CHEMISTRY notes: You will be able to describe the process of electrolysis, compare electrolytic cells with galvanic cells, and perform stoichiometric calculations for electrolytic processes.

What electrolysis is
What electrolysis is
Galvanic cells run on spontaneous redox reactions. The reaction does electrical work on the surroundings

because electrons produced by the reaction travel through an external circuit. Electrolysis is the opposite situation. An external circuit does work on a redox system by imposing a voltage large enough to drive a reaction that is not spontaneous.
Recharging a battery is a familiar example of electrolysis.
An external power source forces the discharge reaction to run in reverse,

which partly restores the composition of the half-cells and the voltage of the battery.
Electrolysis is also used to refine metal ores, to manufacture commodity chemicals,

and to electroplate metal coatings onto products such as jewelry, utensils and auto parts.
The sections below illustrate the key ideas with four processes.
1Electrolysis of molten sodium chloride2Electrolysis of molten sodium chloride3Electrolysis of molten sodium chloride4Electrolysis of molten sodium chloride
Electrolysis of molten sodium chloride
Electrolysis of molten sodium chloride
Metallic sodium and chlorine gas are made on a large scale by electrolysis of molten sodium chloride, NaCl(l). The industrial process typically uses a Downs cell, shown in the diagram below. The two electrode reactions are:
1 / 4Next ▶
Electrolysis of molten sodium chloride
Electrolysis of molten sodium chloride
Cathode (reduction): 2Na
+
+ 2e
−
→ 2Na(l)
Anode (oxidation): 2Cl
◀ Previous2 / 4Next ▶
Electrolysis of molten sodium chloride
Electrolysis of molten sodium chloride
→ Cl
2
(g) + 2e
Adding them gives the overall reaction 2NaCl(l) → 2Na(l) + Cl2(g).
The standard cell potential for this decomposition is negative, about −4.07 V, using the standard reduction potentials of Na+ (−2.71 V) and Cl2 (+1.36 V).
A negative potential means the reaction is not spontaneous as written.
◀ Previous3 / 4Next ▶
A Downs cell with molten sodium chloride between a carbon anode, where chloride ions become chlorine gas, and an iron cathode, where sodium ions become liquid sodium. A porous screen keeps the products apart. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Electrolysis of molten sodium chloride
Electrolysis of molten sodium chloride: A Downs cell with molten sodium chloride between a carbon anode, where chloride ions become chlorine gas, and an iron cathode, where sodium ions become liquid sodium. A porous screen keeps the products apart." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

To force it, you must apply a positive cell voltage whose magnitude is greater than the magnitude of the negative cell potential.
2

Sodium ions move toward the cathode

where they gain electrons and form liquid sodium. Chloride ions move toward the anodewhere they lose electrons and form chlorine gas. A porous screen separates the two products.
◀ Previous4 / 4
1Electrolysis of water2Electrolysis of water3Electrolysis of water4Electrolysis of water
Electrolysis of water
Electrolysis of water
Water can be decomposed electrolytically in a cell like the one shown below. Pure water conducts electricity poorly

so the hydrogen ion concentration is raised by adding a strong acid. This improves conductivity without introducing a different redox-active species. The half-reactions are:
1 / 4Next ▶
Electrolysis of water
Electrolysis of water
Anode (oxidation): 2H
2
O(l) → O
(g) + 4H
+
(aq) + 4e
◀ Previous2 / 4Next ▶
Electrolysis of water
1

−
2

Cathode (reduction): 4H
3

→ 2H
4

(g)
5

The overall reaction is 2H2O(l) → 2H2(g) + O2(g).
6

The cell potential as written is −1.229 V

so the reaction is nonspontaneous and a cell voltage greater than +1.229 V must be imposed.
◀ Previous3 / 4Next ▶
An electrolysis cell for water with dilute sulfuric acid. Oxygen gas collects at the positive anode and hydrogen gas collects at the negative cathode, in a 1 to 2 volume ratio. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Electrolysis of water
Electrolysis of water: An electrolysis cell for water with dilute sulfuric acid. Oxygen gas collects at the positive anode and hydrogen gas collects at the negative cathode, in a 1 to 2 volume ratio." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Electrolysis of water
Standard electrode potentials predict the thermodynamics here

but the cell does not operate under standard-state conditions.
Calculated potentials are therefore only ballpark estimates.
The gases are produced in a 2 : 1 mole ratio, hydrogen at the cathode and oxygen at the anode. This matches the coefficients of the overall equation.
◀ Previous4 / 4
1Electrolysis of aqueous sodium chloride2Electrolysis of aqueous sodium chloride3Electrolysis of aqueous sodium chloride4Electrolysis of aqueous sodium chloride
Electrolysis of aqueous sodium chloride
Electrolysis of aqueous sodium chloride
When an aqueous solution of an ionic compound is electrolyzed, either the water species (H2O, H+, OH−) or the solute ions can react at each electrode. In aqueous sodium chloride, the possible anode reactions are:
1 / 4Next ▶
Electrolysis of aqueous sodium chloride
1

2H
2

2
3

O(l) → O
4

(g) + 4H
5

+
6

(aq) + 4e
◀ Previous2 / 4Next ▶
Electrolysis of aqueous sodium chloride
1

−
2

(oxidation potential −1.229 V)
3

2Cl
4

(aq) → Cl
5

(g) + 2e
6

(oxidation potential −1.358 V)
◀ Previous3 / 4Next ▶
Electrolysis of aqueous sodium chloride
Electrolysis of aqueous sodium chloride
Thermodynamics suggests water is oxidized more readily

because its potential is less negative. In practice, however, both water and chloride ion are oxidized under typical conditions, and the anode produces a mixture of oxygen and chlorine gas.
The possible cathode reactions are reduction of hydrogen ion, 2H+(aq) + 2e− → H2(g), with a standard potential of 0 V, and reduction of water, 2H2O(l) + 2e− → H2(g) + 2OH−(aq).
Standard potentials favor hydrogen ion reduction.
But in a neutral solution the hydrogen ion concentration is only about 10−7 M, far below the standard value of 1 M.
The observed cathode reaction is therefore the reduction of water.
The net cell reaction is 2Cl−(aq) + 2H2O(l) → Cl2(g) + H2(g) + 2OH−(aq). This electrolysis is the basis of the chlor-alkali process

which industry uses to produce chlorine and sodium hydroxide (lye).
◀ Previous4 / 4
1Electroplating2Electroplating3Electroplating
Electroplating
1

Electroplating deposits a thin coating of one metal on the surface of a conducting object.
2

People electroplate to make an object more resistant to corrosion, to strengthen its surface, to give it a more attractive finish,

or to purify a metal.
3

Metals commonly used for electroplating include cadmium, chromium, copper, gold, nickel, silver and tin.
4

Silver-plated tableware, gold-plated jewelry and chrome-plated car parts are everyday examples.
5

The diagram below shows an electrolytic cell for silver-plating eating utensils. The anode is a block of silver, and the cathode is the spoon, made of a cheap metal. Both electrodes sit in a silver nitrate solution. A sufficient voltage oxidizes the silver anode and reduces silver ions at the spoon:
1 / 3Next ▶
Electroplating
Electroplating
Anode: Ag(s) → Ag
+
(aq) + e
−
Cathode: Ag
→ Ag(s)
◀ Previous2 / 3Next ▶
An electrolytic cell for silver-plating a spoon. The silver anode dissolves as silver ions move through the silver nitrate solution, and the spoon cathode gains a silver coating. Image: OpenStax, Chemistry 2e, CC BY 4.0.
Electroplating
Electroplating: An electrolytic cell for silver-plating a spoon. The silver anode dissolves as silver ions move through the silver nitrate solution, and the spoon cathode gains a silver coating." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Electroplating
The net result is that silver metal moves from the anode to the cathode. Good coatings depend on carefully controlled conditions: the exact composition of the electrolyte, the applied cell voltage, and the current

which sets the rate of electrolysis.
◀ Previous3 / 3
1Quantitative aspects of electrolysis2Quantitative aspects of electrolysis
Quantitative aspects of electrolysis
1

Electrical current is the rate of flow of charge, and most often the charge carried is by electrons.
2

The unit of current is the ampere (A), defined as one coulomb per second: 1 A = 1 C/s.
3

The charge Q, in coulombs, passed by a constant current I, in amperes, over a time t, in seconds, is Q = I × t.
4

When electrons are transferred in a redox reaction, the stoichiometry gives the amount of electrical charge involved.
5

For a generic reduction Mn+ + ne− → M, n moles of electrons are transferred for each mole of metal deposited.
6

The total charge is Q = n × F

where F is Faraday’s constant, the charge of one mole of electrons, equal to 96,485 C/mol.
1 / 2Next ▶
Quantitative aspects of electrolysis
1

Combining these relations gives n(electrons) = Q / F = (I × t) / F.
2

Measuring the current in a cell therefore lets you calculate the amount of product formed.
3

Remember to convert minutes or hours to seconds before multiplying by current,
4

and to match the electrons per mole of metal to the metal’s ion charge: 1 for Ag+, 2 for Zn2+, 3 for Al3+ and Cr3+.
◀ Previous2 / 2
1Example 17.9: converting current to moles of electrons2Check your learning: aluminum from aluminum(III) ions3Example 17.10: time required for deposition4Example 17.10: time required for deposition5Check your learning: galvanizing iron with zinc
Example 17.9: converting current to moles of electrons
Example 17.9: converting current to moles of electrons
Problem: In one process for electroplating silver, a current of 10.23 A flows through an electrolytic cell for exactly 1 hour. How many moles of electrons pass through the cell? What mass of silver is deposited at the cathode from the silver nitrate solution?
Solution: Convert 1 hour to 3600 s. The charge is Q = 10.23 A × 3600 s = 3.683 × 104 C. The moles of electrons are n = Q / F = 3.683 × 104 C ÷ 96,485 C/mol = 0.3817 mol e−.
The cathode reaction is Ag+ + e− → Ag

so one mole of electrons deposits one mole of silver. Moles of Ag = 0.3817 mol. With a molar mass of 107.9 g/mol, the mass is 0.3817 mol × 107.9 g/mol = 41.18 g Ag, about 41.2 g.
1 / 5Next ▶
Check your learning: aluminum from aluminum(III) ions
1

Question: Aluminum metal can be made from aluminum(III) ions by electrolysis. What is the cathode half-reaction? What mass of aluminum is recovered if a current of 25.0 A passes through the solution for 15.0 minutes?
2

Answer: The cathode reaction is Al3+ + 3e− → Al(s).
3

Q = 25.0 A × 900 s = 22,500 C

so the moles of electrons are 22,500 C ÷ 96,485 C/mol = 0.2332 mol.
4

Each mole of Al needs 3 mol e−

so moles of Al = 0.0777 mol.
5

Mass = 0.0777 mol × 26.98 g/mol = 2.10 g Al.
◀ Previous2 / 5Next ▶
Example 17.10: time required for deposition
Example 17.10: time required for deposition
Problem: A chromium layer 0.010 mm thick must be deposited on a part with a total surface area of 3.3 m2 from a solution of chromium(III) ions. How long does it take at a current of 33.46 A? The density of chromium metal is 7.19 g/cm3.
Solution: First find the volume.
Area 3.3 m2 = 3.3 × 104 cm2 and thickness 0.010 mm = 1.0 × 10−3 cm

so V = 3.3 × 104 cm2 × 1.0 × 10−3 cm = 33 cm3.
The mass is 33 cm3 × 7.19 g/cm3 = 237 g.
The moles of chromium are 237 g ÷ 52.00 g/mol = 4.56 mol.
Cr3+ + 3e− → Cr requires 3 mol e− per mol Cr

so 3 × 4.56 mol = 13.69 mol e−.
◀ Previous3 / 5Next ▶
Example 17.10: time required for deposition
Example 17.10: time required for deposition
The charge is 13.69 mol × 96,485 C/mol = 1.321 × 106 C.
At 33.46 C/s, the time is t = Q / I = 1.321 × 106 C ÷ 33.46 C/s = 3.95 × 104 s, about 11.0 hours.
◀ Previous4 / 5Next ▶
Check your learning: galvanizing iron with zinc
1

Question: What mass of zinc is needed to galvanize the top of a 3.00 m × 5.50 m sheet of iron to a zinc thickness of 0.100 mm? The zinc comes from Zn(NO3)2 and the current is 25.5 A. How long does the galvanizing take? The density of zinc is 7.140 g/cm3.
2

Answer: The volume is 16.5 m2 × 1.00 × 10−4 m = 1.65 × 10−3 m3 = 1650 cm3.
3

The mass is 1650 cm3 × 7.140 g/cm3 = 1.18 × 104 g

which is 11.8 kg Zn.
4

Zn2+ + 2e− → Zn needs 2 mol e− per mole of zinc.
5

Moles of Zn = 1.18 × 104 g ÷ 65.38 g/mol = 180.2 mol

so electrons = 360.4 mol and Q = 360.4 mol × 96,485 C/mol = 3.48 × 107 C.
6

Time = 3.48 × 107 C ÷ 25.5 C/s = 1.36 × 106 s

which is about 379 hours.
◀ Previous5 / 5
Key terms
Term Meaning
Electrolysis A process in which an external voltage drives a nonspontaneous redox reaction.
Electrolytic cell An electrochemical cell in which an external power source forces a nonspontaneous reaction to occur.
Galvanic cell An electrochemical cell in which a spontaneous redox reaction produces electrical work.
Downs cell A cell used to make sodium and chlorine by electrolysis of molten sodium chloride.
Chlor-alkali process The industrial electrolysis of aqueous sodium chloride that produces chlorine, hydrogen and sodium hydroxide.
Electroplating Depositing a thin layer of one metal onto a conducting surface by electrolysis.
Electrical current The rate of flow of electric charge; measured in amperes.
Ampere (A) The SI unit of current, equal to one coulomb per second.
Coulomb (C) The SI unit of electric charge.
Faraday’s constant (F) The charge of one mole of electrons, 96,485 C/mol.
Half-reaction An equation showing only the oxidation or only the reduction that occurs at one electrode.
Anode The electrode where oxidation occurs; it is positive in an electrolytic cell.
Cathode The electrode where reduction occurs; it is negative in an electrolytic cell.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes4Avoid these mistakes
Avoid these mistakes
1Avoid this
Thinking a negative cell potential means electrolysis happens by itself.Avoid this
A negative potential means the reaction is nonspontaneous, so the applied voltage must be larger in magnitude than that potential.Avoid this
2Avoid this
Assigning the signs of a galvanic cell to an electrolytic cell.Avoid this
In electrolysis the anode is connected to the positive terminal of the power source and the cathode to the negative terminal.Avoid this
1 / 4Next ▶
Avoid these mistakes
3Avoid this
Predicting aqueous products from standard potentials alone.Avoid this
In neutral NaCl solution the hydrogen ion concentration is about 10−7 M, so water is reduced and H2 forms, not sodium metal.Avoid this
4Avoid this
Using minutes or hours directly in Q = I × t. Convert time to seconds before multiplying by the current in amperes.Avoid this
5Avoid this
◀ Previous2 / 4Next ▶
Avoid these mistakes
Forgetting the charge of the metal ion when converting coulombs to moles of metal. Ag needs 1 mol eAvoid this
−Avoid this
per mole, Zn needs 2 and Cr or Al need 3.Avoid this
6Avoid this
Mixing units in volume calculations. Area in mAvoid this
and thickness in mm must be converted to consistent units, such as cmAvoid this
◀ Previous3 / 4Next ▶
Avoid these mistakes
, before using density.Avoid this
◀ Previous4 / 4
Accepted payment methods